R911392471 (HCS01.1E-W0018-A-03-B-ET-EC-NN-S4-NN-AW)
HCS IndraDrive Controllers
Technical Specifications
Product Category
Motion Control Devices
Protection Level
IP20
Motion Control
Integrated according to IEC 61131-3
Vibration Filter
Included
Dimensions
70mm x 268mm x 220mm
Weight
1.7kg
Power Supply
Rectifier unit
Design
Forced Convection
Current Requirements (Peak)
18A
Power Supply Specs
Three-phase 200-500V AC
Current Requirements (Continuous Operation)
7A
Tolerance
10%
Protection Feature
Diode
Contamination Level
2
Communication Interface
Multi-Ethernet
Encoder Interface
Multi-Encoder
Shipping
Worldwide
Frequently Asked Questions
What happens during sudden load inertia changes?
The controller adjusts torque in real time using inner-loop control to counter dynamic load shifts. The result is smooth axis movement with reduced overshoot.
How should this drive be wired in multi-axis setups?
The recommended configuration uses star-point grounding and shielded cables to maintain signal integrity. The shared timing protocols ensure axis coordination across real-time networks.
How does HCS01.1E-W0018-A-03-B-ET-EC-NN-S4-NN-AW behave under variable temperatures?
The controller maintains thermal stability up to 40°C before derating mechanisms activate. The use of ventilation or forced cooling is critical in sealed enclosures.
Which motors should be used with this controller?
The MSK, MS2N, and MSM Rexroth motors offer optimized encoder compatibility and plug-and-play behavior. The feedback structure supports automatic parameterization during startup.
What setup steps ensure optimal closed-loop behavior?
The tuning process must factor in inertia ratios, mechanical stiffness, and feedback resolution. The goal is to minimize vibration and improve transient accuracy.
Common Misspellings
HCS011EW0018A03BETECNNS4NNAW
HCS01 1E W0018 A 03 B ET EC NN S4 NN AW
hcs01.1e-w0018-a-03-a-cc-ec-nn-l3-nn-fw
HCS1.1E-W0018-A-03-B-ET-EC-NN-S4-NN-AW
Internal Product Review
The Bosch Rexroth's HCS01.1E-W0018-A-03-B-ET-EC-NN-S4-NN-AW drive controller belongs to the HCS01 line, offering 18 A peak current and operating at 3 x AC 200–500 V. It features MultiEthernet interface, encoder support for IndraDyn Hiperface/EnDat, and air cooling. Used in automated systems for warehousing, electronics assembly, and intralogistics.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-B-ET-EC-NN-S4-NN-AW.
Want to 
