R911394929 (HCS01.1E-W0018-A-03-B-ET-EC-DA-S4-NN-FW)
HCS IndraDrive Controllers
Technical Specifications
Product Group
HCS
Control Functionality
Motor operation control and monitor
Compatible Motors
MSM, MCL, MSK and MS2N range of motors
Primary Application
General automation, assembly and handling systems
Design
Compact, for control cabinet installation
Installation Orientation
Upright
Communication
Multi-Ethernet module with SERCOS III interface
Mains Connection Voltage
3 x 200VAC to 500VAC
Safety Considerations
Category C3 components as per IEC 61800-3
Operational Environment
Industrial
Firmware
Procured as a separate subitem
Additional Function
Converter function
Underwater Use
Not intended
Surface Cleanliness
Should be free from conductive dirt contamination
Overvoltage Category
III in accordance with IEC 60664-1
Heat Dissipation
Air circulation
Air Quality
Damages due to unclean air in control cabinet
Global Dispatch
Available
Frequently Asked Questions
How does HCS01.1E-W0018-A-03-B-ET-EC-DA-S4-NN-FW simplify drive control integration in standardized automation platforms?
It uses a BASIC control section design for quick deployment and standard wiring. This allows consistent configuration across systems without custom control logic adaptations.
What thermal solution supports long-duration peak current output in tight control cabinets?
Internal air cooling through an integrated blower maintains heat stability. It eliminates the need for external fans while supporting continuous 18 A peak operation.
Can HCS01.1E-W0018-A-03-B-ET-EC-DA-S4-NN-FW optimize energy recovery in regenerative motion systems?
It includes a power supply unit supporting both infeeding and feeded operation. This configuration enables controlled energy flow and regeneration in bidirectional drive topologies.
How does this unit ensure high-resolution positioning in multi-axis applications?
The controller supports IndraDyn Hiperface and EnDat 2.1/2.2 encoders. These enable precise position tracking and feedback synchronization for advanced motion profiles.
What protections are in place for use in industrial cabinets with airborne debris?
The drive controller is rated IP20 for solid object ingress. It must be installed inside a sealed cabinet to ensure long-term reliability in harsh environments.
Common Misspellings
HCS011EW0018A03BETECDAS4NNFW
HCS01 1E W0018 A 03 B ET EC DA S4 NN FW
hcs01.1e-w0018-a-02-b-et-ec-nn-s4-nn-aw
HCS1.1E-W0018-A-03-B-ET-EC-DA-S4-NN-FW
Internal Product Review
The model HCS01.1E-W0018-A-03-B-ET-EC-DA-S4-NN-FW by Bosch Rexroth is a drive controller offering 18 A peak current. It features MultiEthernet connectivity, IP20-rated protection, integrated blower cooling, and support for infeeding/feeded power modes. Its encoder interface supports IndraDyn Hiperface and EnDat 2.1/2.2 for high-precision motion feedback.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-03-B-ET-EC-DA-S4-NN-FW.
Want to 
