R911396367 (HCS01.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW)
HCS IndraDrive Controllers
Technical Specifications
Cool Down Time
15 minutes
Voltage
3 x 110VAC to 230VAC
Type
Converter
Safe Torque Off
Yes
Phase Operation
Single-phase
Communication
Ethernet-based
Control Panel
Standard or Advanced
Use
Machine Tools
Multi-Encoder Interface
Yes
Components Category
C3
Backup Support
1 year
Installation
Read associated documentation
Ambient Conditions
Must adhere
Compatibility
Third-party motor that complies with requirements
PWM Frequencies
1 of 4 possible
Location
Cannot be mounted outside control cabinet
Protection Class
IP 20 according to IEC 529 specs
Control Cabinet Operation
Malfunction with fan but without filters
Shipment
Through trustworthy logistics agents
Frequently Asked Questions
How does the internal blower cooling system support a peak current of 18 A?
The cooling system circulates air internally to dissipate heat from power modules operating at 18 A. The temperature stability ensures efficient thermal management during continuous motor load.
Why is the IP20 rating adequate for 3 x AC 110 to 230 V installations?
The IP20 enclosure prevents accidental contact with live parts under cabinet mounted conditions. The rating supports safe operation when the drive is powered within the 230 V range.
What role does the STO safety interface play in preventing mechanical hazards?
The STO function cuts motor torque instantly without electrical braking. The response eliminates residual motion during emergency stops ensuring personnel safety.
How does the BASIC control section design influence a 3 phase drive system?
The BASIC design offers dependable regulation for standard three phase motor applications. The control logic delivers consistent torque management with minimal tuning effort.
How do the IndraDyn Hiperface and EnDat 2.1 or 2.2 encoders improve positioning accuracy?
The encoders provide digital feedback with sub millimeter resolution. The precise signal transmission enhances repeatability in high speed servo applications.
Common Misspellings
HCS011EW0018A02AETECNNL3NNFW
HCS01 1E W0018 A 02 A ET EC NN L3 NN FW
hcs01.1e-w0013-a-02-b-et-ec-ec-l4-nn-fw
HCS1.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW
Internal Product Review
The Bosch Rexroth Indramat HCS01.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW drive controller features air cooling and an 18A peak current. This product is designed for motion control in automation systems supporting encoder interfaces. The device operates at mains voltage of 110 to 230V and is effective in industrial and robotics applications.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HCS01.1E-W0018-A-02-A-ET-EC-NN-L3-NN-FW.
Want to 
