R911396999 (HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-AW)

What supply range and cabinet conditions are required for HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-AW?

It operates from 3×AC 110…230 V (±10%) and is intended for IP20 cabinet installations with internal air cooling via an integrated blower. Its proper control-cabinet airflow ensures reliable thermal behavior.

Which feedback devices can the Interface 1 accept, and why does that matter for servo loops?

The HCS01 supports encoder families such as Hiperface and EnDat 2.1/2.2, among others for allowing high-resolution position feedback. It enables tight velocity/position loops and repeatable contouring with synchronous motors.

What is the device peak current and how should it be used in application sizing for HCS01.1E-W0013?

The controller provides a 13 A peak, while it is recommended to use it for covering short acceleration/torque transients while sizing to continuous current for thermal steady-state. TIt preserves dynamic response without exceeding thermal limits.

How does the internal blower cooling approach compare to external fans or liquid cooling in this series?

The integrated blower simplifies installation and maintenance by using cabinet airflow paths rather than external radiators or liquid circuits if cabinet exhaust and intake are engineered per guidance. It reduces ancillary components and wiring.

Does the HCS01.1E-W0013 variant accommodate cabinet space constraints and simplified wiring?

Yes, the IndraDrive Cs combines power and control in a single compact unit, minimizing footprint and interconnects compared to split architectures. It assists retrofits and high-density multi-axis panels.

HCS011EW0013A02BETECEPS4NNAW

HCS01 1E W0013 A 02 B ET EC EP S4 NN AW

hcs01.1e-w0009-a-02-e-s3-ec-ep-nn-nn-fw

HCS1.1E-W0013-A-02-B-ET-EC-EP-S4-NN-AW

The Bosch Rexroth Indramat’s HCS01.1E-W0013-A-02-B-ET-EC-EP-S4-NN-AW drive controller is presented with MultiEthernet port and its IP20 protection rating safeguards against external intrudes. It uses blower cooling for maintainingg ambient temperature and to afford 13 A of peak load. This drive is designed for 3×AC 110–230 V supply, with ±10% tolerance. It is ideal for intralogistics and material-handling lines that requires precise and deterministic servo regulation with Hiperface/EnDat feedback.