R911400136 (HCS01.1E-W0013-A-02-B-ET-EC-EP-L4-NN-AW)

What safety functions are implemented, and why are STO and SBC important on this unit?

The STO (Safe Torque Off) prevents unintended torque by safely removing drive enabling, while SBC (Safe Brake Control) actuates holding brakes. It mitigates coasting risks and enables simplified safety chains without external relays.

Which feedback systems are supported, and how does that affect motor choice for HCS01.1E-W0013-A-02-B-ET-EC-EP-L4-NN-AW?

The encoder interface accepts IndraDyn Hiperface and EnDat 2.1/2.2 for enabling accurate position/speed control with common Rexroth and third-party servo motors. Its mixed-encoder fleets can be standardized without changing the power section.

What mains and current ratings should be considered when sizing this controller?

The device operates on 3-phase AC 110…230 V (±10%) with a 13 A peak capability. Its limits inform short-term overload behavior, cable sizing, protective devices and transformer/UPS selection in low-power servo axes.

How does internal-air (integrated blower) cooling and IP20 influence enclosure design?

The blower promotes through-device convection, so provide clear intake/exhaust paths and derating allowances. Its IP20 implies finger protection only, while mount within a switchgear cabinet meeting environmental and contamination requirements.

Why pair Control Section Design BASIC with this HCS01.1E variant, and what does it provide?

The BASIC control section delivers essential motion functions and configuration scope without advanced option boards for lowering cost and engineering overhead. It’s a balanced fit for compact axes needing safe stop, fieldbus and encoder versatility.

HCS011EW0013A02BETECEPL4NNAW

HCS01 1E W0013 A 02 B ET EC EP L4 NN AW

hcs01.1e-w0009-a-02-b-et-ec-pb-nn-aa-fw

HCS1.1E-W0013-A-02-B-ET-EC-EP-L4-NN-AW

Bosch Rexroth produces the drive HCS01.1E-W0013-A-02-B-ET-EC-EP-L4-NN-AW with built-in MultiEthernet, STO/SBC and IndraDyn Hiperface/EnDat 2.1/2.2 within an IP20, blower-cooled design. It operates from a rated 3×AC 110–230 V ±10% supply dource and supports 13 A peak current. This drive pairs with the BASIC control section and supports infeeding/feeded topologies that makes it applicable in packaging, machine tools, printing and assembly/handling lines.