R911403233 (HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW)

How do the dual IndraDyn Hiperface/EnDat 2.1/2.2 interfaces help on HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW?

They let connect modern sine-cosine and digital encoders simultaneously for enabling precise feedback and flexible retrofit paths. Its mixed encoder acceptance eases migration from legacy transducers while retaining fine interpolation and diagnostics.

What control section does the HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW pair with, and why?

It pairs with the ADVANCED control section (“A”) to enable extended motion functions and fast SERCOS III master cross-communication. Its pairing simplifies multi-axis coordination and deterministic cyclic data exchange for tightly synchronized machines.

How do STO and SBC on this controller improve functional safety during machine stops?

The STO removes the drive’s torque-generating energy to prevent unintended motion, while SBC safely actuates the holding brake. It supports risk-reduction architectures without additional contactors in many designs.

Is the HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW suitable for packaging and handling lines?

Yes, the IndraDrive HCS01 targets handling/mounting systems and packaging/food machinery where deterministic motion and compact cabinets are required. Its SERCOS III master and scalable signal processing fit servo axes and feeders.

Why specify firmware as a separate sub-position for HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW?

It is shipped separately so to select the exact function level and language set needed. It avoids over-licensing and aligns firmware with machine standards.

HCS011EW0018A02ACCECECL4NNFW

HCS01 1E W0018 A 02 A CC EC EC L4 NN FW

hcs01.1e-w0013-a-02-a-et-ec-ec-l3-nn-fw

HCS1.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW

The HCS01.1E-W0018-A-02-A-CC-EC-EC-L4-NN-FW controller from Bosch Rexroth combines SERCOS III master communication, dual IndraDyn Hiperface/EnDat feedback and STO/SBC safety in an IP20, internally cooled design. It is rated for 18 A peak at 3×AC 110–230 V that makes it suitable for compact machinery, machine tools, packaging and handling systems. Its firmware needs to be ordered separately as per the requirement.