R911406309 (HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW)

HCS IndraDrive Controllers

HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW Series Image

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The R911406309 (HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW) is a Bosch Rexroth Indramat HCS01.1E series drive controller, designed for integration in automated equipment across multiple industrial sectors. It operates on a three-phase AC supply of 200–500 V (±10%) and supports a device peak current of 8 A. This unit features a BASIC control section (Design Type B), internal air cooling with an integrated blower, and an IP20 protection rating. Encoder interface compatibility includes IndraDyn, Hiperface, EnDat (2.1/2.2), SSI, and TTL, with a PROFIBUS communication interface. It provides 8 digital inputs and requires external procurement of firmware. The device includes an integrated system for brake current measurement and built-in safety for motor winding short circuits. It functions within an ambient temperature range of 0 to 40°C and up to 90% relative humidity, non-condensing.

Technical Specifications

Interface
Multi-Ethernet and Multi-encoder

Construction
Compact

Supported Encoders
Hiperface, EnDat 2.1, EnDat 2.2, SSI, TTL

Cooling Type
Performance-dependent fan

Integrated System
Brake Current Measurement and Monitoring System

Motor Type
Compact MSM Motors

Installation Elevation
Up to 1000 meters above sea level

Humidity Tolerance
Up to 90% Relative Humidity

Optimal Temperature Range
0 - 40 degree Centigrade

Package
Firmware not included

Safety Feature
Shut down at the event of a short circuit

Buffering Options
Battery Box, D-Sub Connectors for Encoder Cables

Digital Inputs
8 (Including 2 probe inputs and 1 combined I/O)

Global Shipping
Yes

Power Source
Recommend Power Supplies Only

Frequently Asked Questions

How does HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW balance legacy and modern networks?

By offering PROFIBUS for legacy device compatibility and MultiEthernet for modern telemetry, it provides a bridge during migration phases. This reduces retrofit cost and preserves investment in existing fieldbus infrastructures.

What commissioning sequence reduces risk for HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW?

Validate encoder signals, check communication links on both PROFIBUS and Ethernet, confirm blower operation, then perform low-speed motion testing. Recording baseline settings and test results ensures reproducible deployments and eases future support.

How does infeeding/feeded capability affect regenerative energy handling on HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW?

The power topology allows regenerative energy to flow back to the DC bus or be shared among feeds, enabling energy reuse when system architecture supports it. Correct bus sizing and protection prevent overvoltage during peak regenerative events.

What maintenance practices protect encoder signal integrity for HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW?

Use shielded cables, secure connectors and perform periodic continuity and insulation checks to preempt intermittent faults. Trend encoder error counts and replace aging cable harnesses proactively to avoid production impacts.

How should firmware be managed for HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW fleets?

Keep a validated firmware repository, test updates on a staging machine reflecting production loads and perform controlled rollouts with rollback images. This reduces the risk of software regressions and ensures operational continuity.

Common Misspellings

Internal Product Review

Indramat's HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW simply combines PROFINET-level diagnostics over PROFIBUS compatibility with efficient blower cooling to support mixed network architectures. The unit targets systems where legacy fieldbus support and modern telemetry must coexist without redesigning cabinets.

1620 Old Apex Road
Cary, NC 27513, USA

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Fax: 1-919-867-6204

[email protected]

Shipping & Payment Options

Warranty

Indramat USA 1 Year Warranty

Repair

We offer a repair service for the HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW.

Exchange

Want to sell your HCS01.1E-W0008-A-03-B-ET-EC-PB-S5-NN-FW?

Quick Links

Terms and Policies

North Carolina Office

Indramat USA
1620 Old Apex Road
Cary, NC 27513
USA

Phone

Toll Free: 1-888-551-3082
International: 1-919-443-0207

Indramat USA sells factory new and pre-owned surplus products and maintains channels to procure supply. Indramat USA is not affiliated with nor an authorized distributor or representative of any manufacturers, brands or products listed. Designated trademarks, brand names, and brands appearing herein are the property of their respective owners.