HDS04.2-W200N
HDS Drive Controllers
The Bosch Rexroth Indramat HDS04.2-W200N from the HDS Drive Controllers series is an industrial-grade drive controller engineered for heavy-duty automation. With a Rated Current of 200 A and a Maximum Output Voltage of 500 V, this unit delivers high-performance power across diverse manufacturing applications. The Built-in Internal Air Blower cooling method maintains consistent thermal management throughout the specified Operating Temperature Range of +5 to +45 degree centigrade, preventing overheating during peak loads. Designed on Line 04 architecture, the HDS04.2-W200N integrates seamlessly into existing HDS04 system infrastructures.
The controller draws up to a Maximum Input Current of 60 A from the mains and relies on a Rated Control Voltage Input of 26 V for its control electronics, consuming just 30 W of power in idle mode. A robust Short Circuit Current Rating of 42000 A combined with an IP 10 protection category ensures fault resilience and basic dust ingress protection in factory environments. Installation at altitudes up to 1000 m and operation in ambient humidity up to 95% allow deployment in varied climatic conditions. The unit’s features are preserved during transport or storage in temperatures ranging from -30 to +85 degree centigrade.
Weighing a modest 19 kg, the HDS04.2-W200N strikes an optimal balance between compact cabinet footprint and substantial drive capacity. Fully validated under Bosch Rexroth’s rigorous testing protocols for Allowable Humidity and Allowable Installation Height, this drive controller guarantees reliable, long-term performance in demanding industrial systems.
Technical Specifications
Continuous Current (4 Khz)
120 A
Continuous Current (8 Khz)
80 A
Control Power Consumption
30 W
Cooling Method
Built-in Internal Air Blower
Depth
308 mm
Height
498 mm
Line
04
Max Ambient Temp (derated)
55 °C
Max Ambient Temp (rated)
45 °C
Max Input Current
60 A
Max Installation Elevation
1000 m
Max Output Current
120 A
Max Output Frequency
1000 Hz
Max Output Voltage
500 V
Other Versions
None
Power Dissipation
800 W
Power Loss At Icont
800 W
Product Type
HDS Drive Controller
Protection Category
IP10
Rated Control Voltage Input
26 VDC
Rated Current
200 A
Short-circuit Current Rating
42000 A
Version
2
Weight
19 kg
Width
150 mm
Frequently Asked Questions
What installation environment is recommended for the HDS04.2-W200N?
It should be mounted inside a protective cabinet since its IP10 rating offers only basic dust resistance. Enclosure ensures both safety and compliance with industrial standards.
Can the HDS04.2-W200N operate effectively in humid climates?
Yes, it tolerates up to 95% ambient humidity when properly installed. Corrosion control and cabinet sealing are still advised in such conditions.
Why is a short circuit current rating of 42 kA significant?
It ensures the controller can withstand high fault currents without catastrophic failure. This rating supports safe integration into high-capacity industrial power systems.
What cabinet space considerations are needed for this unit?
At 19 kg, the controller balances weight and drive power, but cooling airflow must be unobstructed. Planning clearance for heat dissipation is critical.
How does the 26 V control voltage input benefit automation setups?
It isolates sensitive control electronics from high-power sections. This design minimizes noise interference and improves signal stability in automation networks.
Common Misspellings
HDS 04.2-W200N
HDS04-2-W200N
HDS04.2-W200N-FW
HDS042W200N
HDS4.2-W200N
HDSO4.2-W200N
HDS04 2 W200N
hds04.2-w200n
Internal Product Review
The Bosch Rexroth Indramat HDS04.2-W200N is an industrial-grade drive controller designed for heavy-duty automation. It boasts a 200 A rated current with up to 500 V output, internal air-blower cooling, compact 19 kg footprint. Its housing requires installation in a closed cabinet for IP 10 protection.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the HDS04.2-W200N.
Exchange
Want to sell your HDS04.2-W200N?
