R911190068 (HDS04.2-W200N-HT01-01-FW)

Description

The R911190068 (HDS04.2-W200N-HT01-01-FW) drive controller, part of the DIAX04 controller family, is used in robotics and machine tools. Produced by Bosch Rexroth, this device needs careful assembly, operation, storage, and transport for optimum performance and safety. It should only be accessed after the power supply has been turned off for at least five minutes, allowing the capacitors to discharge fully. The device must be housed to protect against direct contact with the machine and should be handled using only suitable tools. Weighing 19kg, it operates optimally at temperatures between 5°C and 45°C, and under no extreme temperature fluctuation. With a SERCOS interface for command communication, it's designed for both single-axis and multiple-axis drive and control applications. It encompasses plug-in modules in slots U1 to U4 and requires all listed modules for operation. The controller should be installed at altitudes not exceeding 1,000m and comes with a one-year warranty.

---