R911288298 (HDS02.2-W040N-HT76-02-FW)

HDS Drive Controllers

Rated 4.5 stars (4 total reviews)

In Stock, Ships 2-3 Days

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Or speak to a sales representative for additional information:

Phone:
1-888-551-3082

Email:
[email protected]

The Bosch Rexroth R911288298 (HDS02.2-W040N-HT76-02-FW) is a DIAX04 drive controller of the HDS series. Not advisable for use in construction cranes, refinery plants, elevators, or medical equipment, the unit could cause hazardous motions due to faulty components, sensors, or circuits. The controller needs to be disconnected from power if stored for long periods and not used in extreme temperatures or fluctuations. The appropriate installation altitude is up to 1,000m above sea level.

This unit consumes 20W for signal processing from a +/-26V source. It should be stored in a dust-free setting free from tremors. For transport, it should be secured on shock-absorbing supports and anti-static packaging is needed for components susceptible to electrostatic discharge. The controller must be vertically mounted on rails with the motor connection at the bottom, using M5 screws. It features a 15A continuous current at 8kHz, an error-message-generating H1 display, and adheres to the DIN VDE 0160 insulation and high voltage standards. It provided with a year's warranty.