The HMS01.1N-W0150-A-27-NNNN is a power unit from the HMS01 series developed by Rexroth Indramat. Designed to work in harmony with a drive controller and supply unit, it is integral to the IndraDrive system, which is employed across a vast range of industries from machine tools to packaging. The power unit adopts a modular design and supports both synchronous and asynchronous AC motors and single-axis devices. Its main features include an air cooling method, a maximum current of 150 Amps, a nominal DC bus voltage of 700 Volts, and an IP 20 protection level. Specifications include a rated input voltage of DC 254-750 Volts, a nominal input current of 115 Amps, and an output voltage of 3 x AC 0-500 Volts. Its mass is 12.74kg and dimensions are 440 x 262 x 150mm. Additionally, the HMS01.1N-W0150-A-27-NNNN has UL recognition and complies with CE standards. As for environmental requirements, it should be operated within a range of 0 to 40°C, below 1000m elevation, and a relative humidity of 95%. Proper installation requires a clearance of 80mm and 100mm above and below the unit, along with forced air of 185m3/h. The unit is only to be installed by trained personnel. It can be acquired from Indramat USA, which gives a one-year warranty.
Product Category: Power Section Design Type: Modular design Continuous Current: Up to 250 A Cooling Method: Air cooling Maximum Current: 150 A Nominal DC Bus Voltage: 700 V Protection Degree: IP 20 Short Circuit Current Rating: 42000 A rms Rated Input Voltage: DC 254-750 V Rated Input Current: 115.0 A Output Voltage: 3 x AC 0-500 V Output Current: 100 A UL Recognition: Yes CE Conformity: Yes Weight: 12.74 kg Dimensions: 440 x 262 x 150 mm Insulation Resistance at DC 500 V: >50 Mohm Operating Temperature: 0 to 40 degrees Installation Elevation: 1000 meters above sea level Relative Humidity: 95% Required Clearance: 80 mm (above), 100mm (below) Forced Air Volumetric Capacity: 185.00m3/h
HMS011NW0150A27NNNN HMS01 1N W0150 A 27 NNNN hms01.1n-w0150-a-27-nnnn HMS1.1N-W0150-A-27-NNNN