HNF01.1C-F240-E0055-A-480-NNNN

HNF Mains Filters

In Stock, Shipping Varies

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Or speak to a sales representative for additional information:

Phone:
1-888-551-3082

Email:
[email protected]

The HNF01.1C-F240-E0055-A-480-NNNN is a premier mains filter designed by Bosch. Its purpose is to maintain EMC limit compliance and modulate leakage currents caused by cable capacitance. Adapted to suit control units, the filter is flexible by current, length of motor cable, and drive numbers. Operating within EMC area Category C2, according to DIN EN 61800-3 standards, the filter supports a maximum of 6 axes and is compatible with cable lengths reaching 240 meters. Specifically intended for feeding devices, the nominal current capacity sits at 55 Amps. The filter connects to AC mains, rated for a three-phase 400 to 480 Volts AC at 50/60 Hertz. For operation, an isolating transformer is required. Situated within an IP20-rated housing, its installation altitude should not surpass 1000 meters and the ideal operating range is 0 to 40 degrees Celsius. With regards to relative humidity, the range lies between 5 to 95%, aligning to the 3K3 climatic category per EN 60721-3-3. Exhibiting Class 3C1 resistance against chemically active substances, as per IEC 60721-3-3 and an acceptable pollution degree of 2 as per EN 50178. The HNF01.1C-F240-E0055-A-480- NNNN complies with overvoltage category III in accordance with IEC 60664-1, and should be handled by trained personnel only. Guaranteed by a one-year global warranty from Indramat USA.