HNF01.1C-F240-E0150-A-480-NNNN

HNF Mains Filters

In Stock, Shipping Varies

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone:
1-888-551-3082

Email:
[email protected]

The HNF01.1C-F240-E0150-A-480-NNNN is a Bosch-made mains filter with an IP20 rating, intended for IndraDrive three-phase drive controllers up to 480 Volts. Its purpose lies in interference suppression, but it should only be used with specifically permitted components. Usage with blowers and pumps, for instance, is prohibited. A transformer for isolation is necessary between the AC mains and the filter if the mains are grounded via the outer conductor. This filter performs optimally at an altitude of up to 1000 meters, temperature varying from 0 to 40 degrees Celsius and relative humidity between 5 to 95%. The device is only suitable for feeding equipment and has an EMC category of C2. It can handle cables of a maximum length of 240 meters and up to six axes. It possesses a nominal current of 150 Amps and peak currents of 225 and 375 Amps for three minutes and 30 seconds per hour, respectively. It has a nominal three-phase input voltage range of 400 to 480 Volts AC and a mains frequency range of 50 to 60 Hertz. A heat dissipation of 51 Watts occurs during operation. The HNF01.1C-F240-E0150-A-480-NNNN measures 298 x 80 x 200 millimeters, weighs 17 kilograms, should be managed by skilled staff, and comes with a one-year global warranty from Indramat USA.