R911326072 (KSM01.2B-061C-61N-S1-HP0-SE-NN-D7-NN-FW)

KSM Motor Integrated Servo Drives

KSM01.2B-061C-61N-S1-HP0-SE-NN-D7-NN-FW Series Image

Call For Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Current response time:

6 Minutes 33 Seconds

Phone:
1-888-551-3082

Email:
[email protected]

The Bosch Rexroth R911326072 (KSM01.2B-061C-61N-S1-HP0-SE-NN-D7-NN-FW) distributed servo drive is a cutting-edge component bolstered by MPB-04V20 firmware. Master communication is achieved via a SERCOS 2 interface, and the drive includes a patch function for reading and writing to internal memory cells, as well as a monitoring function for enhanced diagnostics. Notably, its surface runs hot during operation and has the potential to cause burns. The drive incorporates a DIN 6885-1 compliant keyway shaft and sealing ring, in addition to a hybrid connector for power purposes. The drive rates for a 42,000A short circuit and provides an insulation class of 155 following DIN EN 60034-1 standards. Conveniently, the unit’s parameters can be managed through an RS232 interface, located on the X2 connector. The firmware and necessary parameters are stored on a multimedia card for easy programming during commissioning. Its H14 diagnostic LED light proves helpful in identifying system errors and boot phases. The connection cables should be monitored and replaced as necessary. The drive should be installed ensuring the LED is visible and dismounted only after securing the motor. If replaced, do remember to reload the parameter set. The unit ships with a one-year warranty.