R911248508 (RAC 2.2-200-380-APD-W1)

Name: R911248508 (RAC 2.2-200-380-APD-W1)
Brand: Indramat Drives
SKU: RAC 2.2-200-380-APD-W1
Price: 320.00 USD

RAC Spindle Drive Controllers

Call for Quote

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Phone

Part Number

+Add a message

Message

Request a Replacement

Request a Repair

Quote Both

Expedited Lead Times on Select Parts
1 Year Warranty Included
Free Ground Shipping

Current response time:

6 Minutes 26 Seconds

Phone:
1-888-551-3082

Email:
sales@indramat-usa.com

The R911248508 (RAC 2.2-200-380-APD-W1) is an AC main spindle drive controller developed by Bosch Rexroth, compatible with 1MB and 2AD motor series. It is specified for operation at 3 x AC 400 V, 50-60Hz, with a rated current of 200 A, and operates in dry/warm or moderate/cold climates with up to 70% relative humidity. The device is equipped with an internal blower, supports analogue speed commands (+/-10 V), and provides additional encoder input for high-resolution INDRAMAT encoders. Electrical and mounting accessories are included; proper installation with 80 mm clearance at top and bottom is required. The controller integrates a microprocessor and digital position set-point interface (16 bit parallel), with the main connections at the X4, 9-pole terminal.

Technical Specifications

Operating Climates
Dry/Warm and Cold/Moderate

Relative Humidity
Not more than 70%

Operating Position
Vertical

Minimum Clearance For Operation
80mm

Fitting Kit Included
Yes

Heat Emission
Yes

Heat Discharge Area
Top and bottom air slits

Power Dissipation
Depends on workload

Connection Point
X15 Terminal Strip

Electrical Connection Accessories
Included

Programming Module
AS Module

Control
Microprocessor Controlled

Type Plate Location
Inside, Lower Left

Barcode Location
Side

International Shipping
Available

Frequently Asked Questions

What is the rated connection voltage of the RAC 2.2-200-380-APD-W1?

The rated connection voltage is 3 × AC 400 V, 50-60 Hz for the RAC 2.2-200-380-APD-W1.

Does the RAC 2.2-200-380-APD-W1 have an additional bleeder?

No, the RAC 2.2-200-380-APD-W1 does not have an additional bleeder.

What type of additional interface does the RAC 2.2-200-380-APD-W1 have?

The RAC 2.2-200-380-APD-W1 has a digital position set-point (16-bit parallel) interface.

Does the RAC 2.2-200-380-APD-W1 have an additional encoder input?

Yes, the RAC 2.2-200-380-APD-W1 has an additional encoder input for spindle feedback.

What type of speed command does the RAC 2.2-200-380-APD-W1 use?

The speed command is analogue (+/- 10 V) for the RAC 2.2-200-380-APD-W1.

Common Misspellings

RAC 22200380APDW1

RAC 2 2 200 380 APD W1

Rac 2.2-200-380-apd-w1

Internal Product Review

The RAC 2.2-200-380-APD-W1 is a spindle drive controller featuring a digital position set-point for precise control. Its internal blower ensures stable performance during extended use. This unit is an excellent solution for clients focused on maintaining high accuracy in repetitive operations.