The Bosch Rexroth's R911200935 (RD51.1-5N-315-F-LV-FW) drive control unit offers noise immunity as per EN 55011/EN 61800-3 specifications, including two DC link terminals. Rated for peak current of 562A (one minute), it features M6/M12 motor connection terminals. Caution is advised against component overload. The product includes a direct connection between protective earth and the reference ground through the X14.7 cable. A serial interface connection is available through the X11 connector, compatible with the USS protocol. It's important to note, its firmware needs to be purchased separately. The device is designed to operate between 0-40 degrees Celsius with a maximum relative humidity of 90% and offers an IP 20 protection degree according to EN 60529 regulations. Features also include a tri-colored LED indicating operational status, option for basic parameterization, and a fault-responsive main contactor. The 358 kg unit is shippable with a one-year warranty.
Noise Immunity Level: A1 Compliance: EN 55011 / EN 61800-3 Number of DC Link Terminals: 2 Peak Current Rating: 562A for 1 Minute Weight: 358kg Design Code: 1 Motor Connection Terminals: M6 and M12 Earth Connection: X14.7 Cable to Housing Interface Connection: Serial via X11 Connector Protocol Support: USS Firmware: Purchased Separately Degree of Protection: IP 20 (Without Connection Terminals) Operating Temp Range: 0 to 40°C Max Relative Humidity: 90% Installation Elevation: Specific Limit Cable Requirements: Non-shielded, Twisted Voltage Level: High Operating Condition Indication: Tri-colored LED Parameterizations: 2 (Basic and Advanced) Main Contactor: Shuts Down at Fault Transport: Freight Carrie
RD 51.1-5N-315-F-LV-FW RD51-1-5N-315-F-LV-FW RD51.1 5N 315 F LV FW rd51.1-5n-315-f-lv-fw RD5115N315FLVFW RD51 1 5N 315 F LV FW