The RD51.1-5B-037-L-V1-FW is a high-voltage drive control unit from Bosch Rexroth, designed for a vertical, level-installation. Notably, even when powered off, a potentially hazardous voltage can be maintained for up to five minutes due to DC link capacitors. Control and power terminals may also remain live when associated motors are at a standstill. This device utilizes current feedback via U6, V6, and W6 terminals, and should be kept at a relative humidity below 90% and free from condensation. Proper airflow should be ensured, and cables should maintain a minimum 20cm distance apart to eliminate interference. The unit must be housed in a control cabinet and the operation should not occur under extreme temperature fluctuations. The device should be connected to a 10mm2 cross-section protective conductor, include a start lockout, and accommodate AWG 20 to 10 cable cross-sections for power supply and motor connection terminals. The unit comes with a one-year warranty and is shipped via DHL or FedEx.
Assembly: Perpendicular to a level construction area Voltage Level: High Dangerous Voltage Retention: 5 minutes after power OFF Motor Connection: Located below housing Additional Features: Brake Resistor, DC link, Line supply terminals Relative Humidity: Not more than 90% Condensation: No Airflow: No restriction Heat-sensitive devices distance: Reasonable Mounting: In Control Cabinet Cable Distance: Minimum 20cm Temperature Fluctuation: Not allowed Protective Conductor: Minimum 10mm2 cross-section Starting Lockout Mechanism: Yes Power supply and Motor Connection terminals: Cable-Cross section of AWG 20 to 10 Motor Connection: Through U, V and W terminals of X2 connector Delivery: Through DHL and FedEx
RD 51.1-4B-003-L-DF-FW RD51-1-4B-003-L-DF-FW RD51.1 4B 003 L DF FW RD51.1-4B-OO3-L-DF-FW RD5114B003LDFFW RD51 1 4B 003 L DF FW rd51.1-4b-003-l-df-fw