R911200003 (RZM02.1-6-064)

Orientation: Upright
Safety Measure: Voltage rating check
Conductor Type: Copper
Conductor Cross-Section: Minimum 10mm2
Location: Between motor and converter
Capability: Lowering interfering voltages
Usage: Functioning of multiple motor lines in parallel
Function: Reduces transient voltages on motor terminals
Designation Location: Type plate part of device
Part of: RD 500 drive system
Cable Length: 75m (for shielded cables)
Operating Voltage: 380VAC to 480VAC
Maximum Output Frequency: 200Hz
Pulse Frequency: 8kHz
Storage and Transport: Correct and proper procedure required
Use Requirement: Drive system must meet national EMC regulations
Motor Requirement: Permanent grounding as per the connection diagram