2AD100C-B05OB1-AS13-A2N1

The 2AD100C-B05OB1-AS13-A2N1 is a three-phase induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It serves as the prime mover in automated machine tools, material-handling axes, and other stations where constant-speed or vector-controlled torque is required.

An internal cooling system built around an Axial Blower keeps the stator thermally stable; the blower operates from a dedicated 230 V supply rather than the main power bus. The housing is configured for Flange mounting, so the frame bolts directly to a gearbox or machine wall without additional brackets, and standard bearings support radial and axial loads created by coupled components. A factory-installed electrically engaged clamp brake holds the shaft during power-off conditions, improving safety on vertical axes. Position data is returned through high-resolution motor feedback, enabling fine speed regulation and quick alignment after each start. Power enters through a connector arranged on the top of the stator and oriented to Side B, which simplifies cable trays shared with adjacent drives.

Sizing follows internal design codes: the frame is identified as motor size code 100 and the active core length as motor length code C, a combination that balances continuous output with installation depth. Dynamic behavior is rated to vibration grade R, indicating controlled oscillation levels compatible with precision gear trains and sensor arrays. The stator winding specified by winding code AS sets the electrical impedance that the matched inverter expects. A smooth shaft without a seal minimizes friction, and Side B is supplied without a shaft end when through-drive is unnecessary. Connection hardware uses a keyed power connector, while the feedback and blower cables share the same routing path for maintenance clarity.