2AD100C-B05OR2-AS03-B2N1

The 2AD100C-B05OR2-AS03-B2N1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. Designed for integration into drive packages and automation lines, the unit converts three-phase electrical power into continuous shaft rotation for presses, handling gantries, and packaging machinery. It supports forced-air cooling so it can maintain rated output during extended operation in enclosed cabinets. A standard bearing arrangement and modular power connector layout align it with other components in the platform.

The thermal system relies on a 230 V axial fan; selecting an axial blower maintains airflow independent of rotor speed. Because the unit is assembled without a holding brake, stopping torque must come from the drive or an external brake. Mechanical fixation is achieved through flange mounting, a pattern that aligns with IEC dimensions and shortens installation time. Position and speed data are delivered by high-resolution motor feedback, enabling precise vector control at low frequencies. Standard bearings absorb radial and axial loads, while the C-length frame carries windings identified by code AS. The right-hand power connector simplifies cabinet wiring, and side B is left without a secondary shaft.

With its frame diameter categorized as 100, the motor provides a moderate torque envelope while keeping mass compatible with mid-size gearboxes. The three-phase supply enters from the top, and the connector orientation allows vertical cable loops that clear adjacent devices. Torsional alignment accuracy improves because the shaft is balanced with entire key, a feature that reduces residual vibration and complements the specified vibration grade R for smoother operation at full speed. Eliminating a shaft seal lowers drag for high-cycle indexing, and the extended active core depth increases continuous output without unnecessary inertia.