The Bosch Rexroth Indramat 2AD132B-B05OA2-BS03-D2N3 from the 2AD 3-Phase Induction Motors series exemplifies rugged industrial performance with an rated torque of 76 Nm, rated power of 11.9 kW, and rated current of 28.0 Amperes at a nominal speed of 1500 rpm. Engineered as an asynchronous AC induction motor, it delivers consistent dynamics thanks to its moment of inertia of 0.054 kgm and maintains full-load output up to the derating speed of 1500 rpm. The motor's robust design ensures seamless integration into high-demand applications while preserving long-term reliability. Manufactured by Bosch Rexroth Indramat, this frame size 132 unit balances power density and serviceability in one compact package.
Thermal regulation is handled by an axial blower cooling type that directs airflow across the stator and rotor for continuous operation. The motor employs standard bearings with a vibration grade of S1 to minimize noise and extend bearing life under cyclic loads. Precision control is assured through a high-resolution motor feedback device, enabling tight speed and torque regulation when paired with INDRADRIVE, DIAX, or ECODRIVE systems. At 90 kg mass, this B-length motor remains manageable for installation yet substantial enough to dampen torsional vibrations in demanding cycles. The flange mounting configuration and balanced shaft seal with full key ensure mechanical stability and leak-free operation across all mounting orientations.
Power and signal interfaces are optimized with a power connection direction to Side A and top power connection position, simplifying cable routing in densely packed control cabinets. A minimum conductor cross-section of 4 mm is required for safe power hookup, while the shaft end (Side B) without shaft end design supports direct coupling or flexible adapter attachments. Although supplied without holding brake, this motor can be fitted with optional accessories for enhanced safety. Each unit must be permanently grounded using a 10 mm copper conductor to meet installation and operational safety standards.
Bearings
Standard
Cooling Type
Axial Blower
Brake
Without holding brake
Feedback Device
High-resolution motor feedback
Motor Length Code
B
Mounting
Flange mounting
Shaft Type
shaft seal, with balanced with entire key
Power Connection Direction
To Side A
Power Connection Position
Top
Product Type
AC Induction Motor
Shaft End (Side B)
Without shaft end
Vibration Grade
S1
Derating speed
1500 rpm
Moment of inerta of rotor
0.054 kgm
Mass
90 kg
Rated torque
76 Nm
Rated power
11.9 kW
Rated current
28.0 Amperes
Min. cross-section of power connection
4 mm