2AD132C-B35RB3-BS03-B3V1/S020
2AD 3-Phase Induction Motors
The 2AD132C-B35RB3-BS03-B3V1/S020 from Bosch Rexroth Indramat is an AC induction motor with a power rating of 15 kW and a frame size of C. Part of the 2AD 3-Phase Induction Motors series, this motor features radial blower cooling and flange and foot mounting.
It achieves a base speed of 1500 rpm and can reach a maximum speed of 7500 rpm with rotor inertia of 0.076 kgm². The motor operates without a holding brake and includes a high-resolution feedback device.
Technical Specifications
Bearings
Heavy-duty
Cooling Type
Radial Blower
Brake
Without holding brake
Feedback Device
High-resolution motor feedback
Motor Length Code
C
Mounting
Flange and foot mounting
Shaft Type
Without shaft seal, with balanced with entire key
Power Connection Direction
To Side B
Power Connection Position
Right (View from front towards shaft)
Product Type
AC Induction Motor
Shaft End (Side B)
With shaft end
Vibration Grade
R
Motor Length
454 mm
Maximum Speed
7500 rpm
Rotor Motor Inertia
0.076 kgm²
Base Speed
1500 rpm
Power Rating
15 kW
Rotational Torque
Up to 113 Nm (at higher speeds)
Frame Size
C
Frequently Asked Questions
Can the 2AD132C-B35RB3-BS03-B3V1/S020 be mounted in vertical orientations?
Yes, flange and foot mounting offer flexible orientation options, including vertical setups. Ensure proper airflow clearance for the radial blower when installed vertically.
How does high rotor inertia (0.076 kgm²) affect system performance?
Higher inertia provides smoother torque transitions but slows acceleration and deceleration. It's ideal for applications with steady loads rather than rapid start-stop cycles.
What installation considerations are there for the power connection on Side B?
Side B power entry may require specific cable routing space in control cabinets. Confirm enclosure design accounts for connection clearance and strain relief.
Is the 2AD132C-B35RB3-BS03-B3V1/S020 motor compatible with precision motion control systems?
Yes, its high-resolution feedback device supports accurate position and speed regulation. This makes it suitable for servo applications and closed-loop control environments.
How does the motor’s 7500 rpm max speed influence bearing selection or maintenance?
High speeds place increased stress on bearings, necessitating heavy-duty, high-precision bearings. Regular lubrication and inspection intervals must be maintained to avoid wear.
Common Misspellings
2AD132C B35RB3 BS03 B3V1/S020
2AD132CB35RB3BS03B3V1/S020
2AD132C-B35RB3-BS03-B3V1/S020
2AD132C-B35RB3-BSO3-B3V1/SO2O
2AD132C-835R83-8S03-83V1/S020
2AD132C-835R83-8SO3-83V1/SO2O
2AD132CB35RB3BSO3B3V1/SO2O
Internal Product Review
The 2AD132C-B35RB3-BS03-B3V1/S020 is an induction motor from Bosch Rexroth Company. It delivers 15 kW power at base speed 1500 rpm, peaking at 7500 rpm, with radial‑blower cooling, heavy‑duty bearings, flange and foot mounting, and high‑resolution feedback. Its housing is IP65‑rated, fully sealed per DIN‑40050 for dust and water protection.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the 2AD132C-B35RB3-BS03-B3V1/S020.
Want to 
