2AD132D-B05LA3-AS07-C2N1

The 2AD132D-B05LA3-AS07-C2N1 is an AC induction motor produced by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. The design converts three-phase electrical power into steady rotational motion suitable for pumps, cutters, and conveyor modules inside automated machining cells. When driven by a matched inverter, the motor delivers closed-loop speed regulation and high cycle consistency, allowing equipment builders to standardize on one frame while scaling torque through different winding codes.

With a frame designation of 132 and a length code of D, the motor sits in the mid-power range of the series. Stator heat is removed by a Radial Blower that forces airflow through internal ducts, eliminating the need for external cooling pipes. Machine integration is simplified by flange mounting; the face registers directly to the gearbox or housing and the standard bearings support radial and axial forces expected in that configuration. The power cable enters on the housing side identified as to Side A, while the terminal box is fixed on the left when the shaft is viewed from the front. The unit is supplied without a holding brake, so position retention during power-off must be provided mechanically. Winding code AS sets the resistance and leakage reactance values that the drive controller will use for autotuning.

Position feedback is provided by a digital sensor that includes a multiturn absolute encoder, giving the inverter both speed and shaft-revolution data for coordinated axis control. The output side employs a smooth shaft with shaft seal that blocks lubricant egress and accepts shrink-fit couplings, while the opposite end is manufactured without a shaft extension to reduce overall length. Dynamic balance is rated to vibration grade R, allowing operation in machines that specify reduced oscillation at nominal speed. The absence of a shaft on the B side frees space for wiring and air passages without affecting rotor stiffness.