The 2AD132D-B05OB1-AS03-D2N1 from Bosch Rexroth Indramat in the 2AD 3-Phase Induction Motors series delivers a robust 13.2 kW output while sustaining a rated torque of 115 Nm at a rated speed of 1100 rpm. Built on a DS winding architecture, this AC induction motor maintains consistent performance under industrial loads. Its flange mounting footprint and balanced shaft seal design facilitate straightforward integration into existing drives. With a mass of 115 kg, it balances heft and rigidity for heavy-duty applications.
Engineered for demanding environments, the motor employs standard Bearings lubricated for longevity and an Axial Blower Cooling Type to dissipate heat efficiently. It draws 31.5 A rated current and withstands transient stalls via a Standstill continuous torque reserve. Vibration is minimized by the R grade Vibration Grade, while noise is contained at 75 dB(A). The motor’s Maximum speed ceiling of 7500 rpm and a thermal time constant of 50 min ensure both rapid response and controlled temperature rise. Additional design features include a high-resolution Feedback Device, side-B Power Connection Direction and top-position Power Connection Position for cable routing versatility.
This IP65-rated motor delivers proven reliability in dusty or wet environments, simplifying plant-floor protection without external housings. Its standardized dimensions and flange interface allow drop-in replacement and swift commissioning. Ideal for torque-critical drives, conveyors, and heavy machinery, the 2AD132D-B05OB1-AS03-D2N1 enhances uptime and streamlines industrial automation integration.
Bearings
Standard
Cooling Type
Axial Blower
Brake
Without holding brake
Feedback Device
High-resolution motor feedback
Motor Length Code
D
Mounting
Flange mounting
Shaft Type
shaft seal, with balanced with entire key
Power Connection Direction
To Side B
Power Connection Position
Top
Product Type
AC Induction Motor
Shaft End (Side B)
Without shaft end
Vibration Grade
R
Standstill continuous torque
=MN Nm
Noise level
75 dB(A)
Rated current
31.5 A
Maximum speed
7500 rpm
Rated torque
115 Nm
Mass
115 kg
Winding
DS
The 2AD132D-B05OB1-AS03-D2N1 shows firm alignment in execution. Every motion reflects controlled precision. Tasks complete without any unwanted shift. It holds its rhythm from beginning to end. Movements carry through evenly. There’s no irregular feedback or noise during changeover. Output follows a stable course, ensuring uninterrupted performance across extended routines.