2AD132D-B05OB1-BD13-B2N1

The Bosch Rexroth Indramat 2AD132D-B05OB1-BD13-B2N1 is a robust AC Induction Motor in the renowned 2AD 3-Phase Induction Motors series, designed for demanding industrial applications. Manufactured by Bosch Rexroth Indramat, this asynchronous motor features a Motor Length Code D and a frame size of 132, providing a compact yet powerful footprint. With a total mass of 139 kg, the motor integrates an electrically engaged Brake (clamp) weighing 4 kg and offers universal Bearings for smooth operation. The unit comes with a balanced Shaft Type without shaft seal and the entire keyed shaft end, ensuring reliable torque transmission. Its Power Connection Direction is oriented to Side B and the Power Connection Position is on Top for streamlined installation. The motor’s Product Type designation underscores its design as a high-performance AC induction solution.

Performance characteristics of the 2AD132D-B05OB1-BD13-B2N1 highlight a rated speed of 1500 rpm and a peak speed of 7500 rpm, enabling rapid acceleration and deceleration profiles. The electrically engaged holding brake delivers a maximum braking energy of 30 kWs (30,000 J) with a brake rotor moment of inertia of 0.002 kg·m². Brake actuation times include a release delay of 140 ms and a clamp delay of 110 ms, while the nominal terminal nominal voltage for brake operation is 24 V DC (±10%). Cooling is provided by an Axial Blower Cooling Type, which maintains optimal thermal conditions under continuous duty. Vibration levels conform to Vibration Grade R (regular severity), and high-precision motion control is supported by an integrated Feedback Device. This motor’s design also accommodates a large average air volume flow of 1000 m³/h (A to B).

Reliability is reinforced by an enclosure meeting DIN 40050 ingress protection standards, safeguarding internal components from dust and water penetration. The motor supports multiple mounting configurations—Mounting IM B 5, IM V 1, and IM V 3 per DIN IEC 34-7—allowing flexible installation in diverse machine setups. Ambient operating temperatures from 0 °C to 45 °C and installation altitudes up to 1000 m are specified for consistent performance. An integrated NTC thermistor provides continuous thermal overload monitoring, and the recommended lubricant acts simultaneously as a coolant at contact points. With its standardized Shaft End (Side B) design (without sealing rings) and a minimum connection cross-section of 25 mm² per EN 60204, this motor seamlessly integrates into complex automation systems, spanning material handling, packaging lines, and heavy-duty drive applications.