2AD132D-B35OA1-AS06-A2N2

The 2AD132D-B35OA1-AS06-A2N2 is an induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. Designed for integration with drive controllers, the motor supplies constant torque to automated transfer lines, material handling gantries, and packaging axes where three-phase mains are available. It combines a shrouded stator housing, cooling assembly, and feedback interface to simplify installation inside machine frames.

The motor employs an Axial Blower that forces air along the housing to dissipate heat during sustained duty cycles. Position and velocity data are returned via digital servo feedback, enabling the drive controller to adjust current in real time. Frame sizing follows the 132 code, while the D length code identifies the deeper lamination stack that increases continuous power density. Machine builders can attach the unit through Flange and foot mounting, letting the same model serve horizontal beds or vertical plates without additional brackets. Standard bearings support the rotor, and the power leads exit at the top of the motor toward Side A to clear adjacent components.

Control components can select the appropriate winding thanks to code AS, which matches resistance and inductance values to compatible Indramat inverters. Safety systems that depend on mechanical locking must be handled externally because the motor is supplied without a holding brake. The output is a smooth shaft without seal, and the opposite side is manufactured without a shaft end, reducing potential leak paths in wash-down zones. Dynamic behavior is classified under vibration grade S, allowing the rotor to meet balance limits at rated speed.