2AD134B-B05OB2-FS26-C2N2

The 2AD134B-B05OB2-FS26-C2N2 is an induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. In automated machinery it converts electrical energy into rotary motion that can drive pumps, spindles, or material-handling axes, and its electrically released holding brake keeps shafts stationary when power is removed.

The brake supplies 80 Nm of static torque, so loads remain fixed until the brake coil is energized. Continuous heat from the stator is removed by an integrated Axial blower, which is powered through the same top-mounted plug used for the main conductors; this forced airflow lets the motor maintain rated output inside closed cabinets. Position and speed are reported through Digital servo feedback, allowing the drive controller to correct slip and keep synchronous speed accuracy. The housing is prepared for Flange mounting, meaning the face of the motor bolts directly to the machine frame and eliminates the need for feet. Rotor and stator are supported by Standard bearings that balance load capacity with low friction for continuous duty.

A Smooth shaft with shaft seal prevents lubricant migration while still accepting external couplings; the opposite end is left without a shaft to save space in axial layouts. Winding code FS identifies the conductor cross-section and insulation scheme used to match thermal class and voltage. Motor size code 134 defines a stator diameter that fits drives needing moderate power, while length code B sets the active stack height. Vibration grade S indicates the rotor is balanced to a stringent specification, reducing transmitted oscillations to connected equipment. Power conductors exit toward Side B from the top of the housing through a pre-wired plug, simplifying replacement during maintenance without disturbing adjacent components.