2AD134C-B35OD1-HS06-A2N1

The 2AD134C-B35OD1-HS06-A2N1 is an AC induction motor produced by Bosch Rexroth Indramat within the 2AD 3-Phase Induction Motors series. It serves as a drive source for conveyors, presses, and other automation axes that require constant-speed rotation under vector control. Designed for integration with digital drives, the motor supplies continuous torque while its blower-assisted frame maintains thermal stability during extended operation in industrial environments.

An internal Axial Blower forces air along the stator housing to remove heat, allowing the unit to run at rated current without derating. Closed-loop control is possible because the motor carries Digital servo feedback, which relays speed and position data to the inverter. Mechanical mounting flexibility is provided by Flange and foot mounting surfaces, enabling either end-of-shaft or base installations. The power leads exit toward Side B, and the junction box is located on the Top of the frame so cable bends are minimized inside a cabinet. Standard bearings support the rotor, and the design is shipped without a holding brake, which reduces axial length and inertia for high-cycle applications. Length code C matches the 134 mm frame size to a medium stack height, balancing power density and mass.

Electrical termination is completed through a Junction Box that also supplies the blower, simplifying service because both power and auxiliary connections are under one cover. A Smooth shaft without seal transmits torque to the load; the absence of a seal reduces friction but requires the driven machine to provide its own contamination barrier. The vibration behavior meets grade R, keeping displacement within limits for precision assemblies. Finally, the HS winding set, identified by code HS, defines conductor size and insulation so the motor can pair with high-frequency drives while maintaining thermal class margins.