2AD164B-B35LB1-DS06-B2N1
2AD 3-Phase Induction Motors
Rated 4.7 stars (8 total reviews)
The 2AD164B-B35LB1-DS06-B2N1 is an AC induction motor engineered by Bosch Rexroth Indramat for the 2AD 3-Phase Induction Motors series. It converts three-phase electrical power into mechanical rotation for conveyors, spindle drives, and general motion axes in automated lines. When paired with an appropriate controller, the motor supplies continuous torque over a broad speed range, providing the regulated motion necessary for material handling and processing equipment in industrial automation.
Thermal control is delivered by an integrated axial blower that forces cooling air across the stator; the fan operates at 400 V, maintaining winding temperatures during extended duty. The unit is supplied without a holding brake, so external locking devices are required for vertical or load-holding applications. Rotor position is monitored through digital servo feedback, allowing the drive to correct slip and sustain commanded speed. Mechanical installation is flexible thanks to flange and foot mounting, enabling alignment on a base plate while keeping the shaft centered in radial bearings. Together, these characteristics support continuous operation while ensuring temperature, position, and mechanical alignment stay within design limits.
Power and blower leads exit the housing to Side B, and a single power plug (blower with plug) simplifies connection work inside control cabinets. Frame size code 164 identifies the stator diameter class that dictates torque capacity and interface dimensions. Resistance to operational oscillation is classified under vibration grade R, permitting installation on machinery with moderate dynamic loads. The shaft is delivered without a separate seal but balanced with the full key, facilitating direct coupling. A compact length code B enclosure houses the DS winding set, keeping overall motor length moderate while maintaining the required thermal and electrical performance.
Technical Specifications
Ambient Temperature Range
0-40 Degrees Celsius
Axial Blower Voltage
400V
Bearings
Standard
Brake
Without holding brake
Cooling Type
Axial Blower
Feedback Device
Digital servo feedback
Motor Designation
2AD
Motor Length Code
B
Motor Size Code
164
Mounting
Flange and foot mounting
Power Connection Direction
To Side B
Power Connection Position
Left (View from front towards shaft)
Power Connection Type
Power Plug (Blower with plug)
Product Type
AC Induction Motor
Shaft End (Side B)
Without shaft end
Shaft Type
Without shaft seal, with balanced with entire key
Vibration Grade
R
Winding Code
DS
Frequently Asked Questions
Common Misspellings
Internal Product Review
The 2AD164B‑B35LB1‑DS06‑B2N1 is a Bosch Rexroth Indramat 3‑phase AC induction motor featuring axial-blower cooling at 400 V. It offers digital servo feedback, dual flange-and-foot mounting, and operates reliably in 0–40°C environments with standard bearings. Its housing is IP-rated, resisting dust and water for rugged durability.
Fax: 1-919-867-6204
Shipping & Payment Options
Warranty
Indramat USA 1 Year Warranty
Repair
We offer a repair service for the 2AD164B-B35LB1-DS06-B2N1. 
Want to 
