MAC063D-0-FS-4-C/095-B-0/WI560LV/S023

The MAC063D-0-FS-4-C/095-B-0/WI560LV/S023 servo motor is produced by Bosch Rexroth Indramat within the MAC AC Servo Motors series. This motor for analog drives supplies precise velocity and torque control in industrial automation axes that rely on analog command interfaces. By combining its rotor–stator geometry with tachofeedback or encoder signals, the unit closes the control loop between the drive and the mechanical load. The absence of a blocking brake supports dynamic applications where the load is held by drive torque rather than a mechanical latch.

At standstill the winding carries 5.1 A, establishing the continuous torque capability without thermal overload. Heat generated at that current is removed through natural convection, eliminating the need for forced-air devices and simplifying cabinet layouts. The housing meets IP65 ingress protection, so dust and water jets cannot reach internal components. Mechanical mounting aligns through a 95 mm centering diameter, ensuring concentric positioning with gearboxes or machine frames. Electromagnetic characteristics follow winding code FS, which defines resistance and inductance suited for the associated drive electronics.

Dynamic operating points are governed by two rated speeds. For constant-load tasks the motor runs at 3500 min⁻¹, while intermittent duties can reach 6000 min⁻¹ before torque derating begins. Velocity feedback for these ranges is delivered by a standard tachogenerator that outputs 1.5 V/1000 min⁻¹, giving the drive a linear speed reference. Position data is available from an incremental encoder with standard mounting, matching the tachofeedback option recorded in the model code. Electrical power is supplied through a connector on side B, and the size 063 stator in length D keeps overall package dimensions compact for multi-axis machines.