MAC112C-0-KD-0-C/130-A-1/S005

The MAC112C-0-KD-0-C/130-A-1/S005 is an AC servo motor produced by Bosch Rexroth Indramat in the MAC AC Servo Motors series. Intended for analogue drive systems, it converts command voltages into controlled shaft rotation for positioning, conveying, and forming equipment used in industrial automation. The unit incorporates rotor feedback and an integrated blocking brake so that motion can be started, regulated, and held precisely under the closed-loop control of compatible analogue amplifiers.

Mechanical holding is provided by a standard blocking brake that delivers 45 Nm of torque, securing the load whenever power is removed. During operation the rotor reaches its nominal speed of 1500 min⁻¹, a value matched to legacy analogue regulators. Thermal energy is dissipated through Natural convection, so continuous duty requires unobstructed airflow around the housing. Accurate concentric alignment is achieved with a 130 mm centering diameter, allowing direct flange mounting without additional shims. Electrical characteristics follow winding code KD; this code defines resistance and inductance parameters so that the associated drive can supply current without exceeding thermal limits.

Dimensional classification is identified by motor length C and frame size 112, establishing the stator volume and shaft height within the MAC family. Velocity feedback is produced by a tacho generator rated at 3 V/1000 min⁻¹, built to standard tacho quality for reliable analogue speed loops. Mains conductors are routed through a Connector to side A, simplifying cabinet wiring when the fanless housing is installed in either horizontal or vertical orientations.