MAC090C-0-GD-4-C/110-A-0/WI533/S001

The Bosch Rexroth Indramat MAC090C-0-GD-4-C/110-A-0/WI533/S001 servo motor is a high-performance member of the MAC AC Servo Motors series, engineered for demanding industrial automation applications. This robust AC servo motor delivers 9.6 Nm torque at a continuous duty cycle and achieves a 3000 rpm speed for rapid positioning and acceleration profiles. It sustains momentary peaks of 196 A peak current to accommodate transient load demands while ensuring stable thermal performance. The motor is sealed to IP65 protection class, providing dust-tight and water-resistant operation in harsh factory environments. With a substantial 23 Kg weight, the unit features a rigid, cast-iron housing for enhanced vibration damping and mechanical stability.

The technical foundation of the MAC090C-0-GD-4-C/... motor is built upon a 110 mm centering diameter that matches standard C-frame mounting requirements and a frame defined by Motor Size 90 and Motor Length C. It operates from a 500 V DC rated voltage bus and draws 20 A rated current at nominal load, with a maximum of 196 A peak current under peak torque conditions. Copper windings formed from Copper conductor material and insulated with XLPE insulation material achieve an Insulation class F rating, ensuring long-term reliability at elevated temperatures. Position and speed are regulated via an Incremental tachofeedback encoder, delivering precise control signals for closed-loop motion control. The motor’s passive cooling is classified as Natural Convection cooling type, eliminating the need for external fans and reducing maintenance points.

Operational performance is further defined by a wide -40 °C to 90 °C temperature range, allowing deployment in ambient extremes without derating. The winding humidity tolerance of 0.9 (relative units) ensures insulative integrity under moist conditions, while the ability to install up to Minimum 1000 meters installation height above sea level maintains consistent power handling and cooling performance. At standstill, the motor withstands full rated current without overheat, and its 23 Kg weight contributes to a low center of gravity, enhancing dynamic stability in rapid motion cycles. The combination of 9.6 Nm torque, 3000 rpm speed, and 196 A peak current capability delivers exceptional acceleration and precise load handling in high-duty industrial processes.

Integration into control systems is streamlined via standard C-frame mounting with the 110 mm centering diameter, and the natural convection cooling simplifies installation without auxiliary cooling hardware. The processor-level drive interface expected for Bosch Rexroth Indramat controllers supports automatic tuning, position loop optimization, and real-time diagnostics. This servo motor is ideally suited for precision CNC machines, pick-and-place robots, packaging lines, and other industrial automation solutions where high torque density, robust environmental protection, and seamless system compatibility are critical to operational success.