MAC112C-1-HD-4-C/130-B-1/DI524LV/S014

The MAC112C-1-HD-4-C/130-B-1/DI524LV/S014 represents a high-performance AC servomotor from Bosch Rexroth Indramat within the MAC AC Servo Motors series. This AC Servo Motor is built on a robust Motor Size 112 frame with a Motor Length C design, ensuring compact integration in precision drive systems. Featuring Insulation Class F, the motor operates reliably up to a Maximum Operating Temperature of 55 degrees C. The housing is IP65 rated for dust-tight protection and resistance against low-pressure water jets, while the integrated Cooling Type Surface Cooled blower provides efficient thermal management. Designed for industrial use, this servomotor is specified for Ambient Installation Elevation 0 to 1000 m Above Sea Level and caters to standard Applications in machine tool and automation environments.

Performance features include a high-resolution Pulse Type of Encoder: Square-Wave Signals implemented via a 12-pin flanged socket for feedback. The motor’s plain and smooth output shaft, mounted on a B14 flange, accommodates axial and radial loads without additional shock-damped mounting. A Type of Holding Brake: Standard blocking brake engages with a Clamping Delay of Blocking Brake 30 ms and releases in Release Delay of Blocking Brake 70 ms, ensuring secure positioning during power interruptions. Though the unit requires operation with a compatible drive controller and should not be used in residential settings, its C-encoder and tacho voltage matched to nominal speed deliver precise speed regulation. The dedicated blower connection, rated Blower Protection Category IP24, supports continuous cooling under heavy duty cycles.

Reliability is enhanced through strict adherence to product design: the motor must be replaced only with identical type units to maintain performance consistency. While the housing coating demands careful maintenance to prevent peeling under steam cleaning, the unit’s integral protective covers must remain until final assembly to guarantee factory-specified ingress protection. The device is not certified for use in explosion hazard areas. Its versatility allows mounting in any orientation, making it suitable for demanding applications such as stamping machines and presses. Integration into automated systems is simplified by the distinct rating plate with type designation and key technical details, facilitating rapid commissioning and service.