MAD100C-0200-SA-S0-BG0-05-N1

The MAD100C-0200-SA-S0-BG0-05-N1 is a synchronous servo motor manufactured by Bosch Rexroth Indramat for the MAD IndraDyn A Motors series. It is used in automation cells to drive axes that demand high positioning accuracy and repeatable torque, helping machine controllers coordinate rapid starts, stops, and reversals on packaging, material-handling, and machining equipment.

The motor’s power and feedback terminations are located on the B-side, keeping service loops on one end of the machine frame. A sealed industrial connector supports quick replacement without rewiring. Internal heat is removed by an integral axial fan, so full continuous torque is available even in cabinets with limited airflow. Rotor position is reported by a singleturn absolute encoder, allowing the drive to recover exact shaft angle after power cycles without homing moves. The frame size is coded as 100, indicating the stator diameter that dictates mechanical envelope and torque density. Standard bearings carry radial and axial loads, and the unit ships without a holding brake, so static load retention must be supplied externally when power is removed.

The active iron stack is extended to length code C, giving a greater magnetic path for higher continuous torque at the same current. A circular flange mounting interface aligns the motor to gearboxes or machine plates without foot hardware. Motion is transmitted through a smooth shaft with shaft seal; the seal limits lubricant loss and protects internal components from splash or dust. Electrical characteristics are tied to winding code 0200, allowing the drive to match resistance and inductance for optimal current control. Vibration grade R defines balance quality so the motor can run at rated speed without exceeding allowable machine vibrations.