MAD130C-0050-SA-S2-HL0-35-N1

The MAD130C-0050-SA-S2-HL0-35-N1 belongs to the MAD IndraDyn A Motors series from Bosch Rexroth Indramat. It is a servo motor intended for coordinated axis control in industrial automation, where precise torque delivery at low speed is required. Its rated mechanical output is optimized for machines that must hold position accurately while moving slowly, such as large indexing tables or processing rollers.

The motor reaches a rated speed of 500 rpm, a limit set by its 130 mm frame size and the Axial fan that forces air through the housing to remove heat at that operating point. Power and feedback conductors enter through a right-angle Terminal box, simplifying field wiring when the unit is installed close to other equipment. Rotor position is monitored by a Singleturn absolute encoder EnDat2.1, so the drive always knows the exact electrical angle after startup. The housing supports Flange and foot mounting, allowing either rigid face coupling to gearboxes or base mounting on machine beds. Because the unit is supplied without a holding brake, stationary torque must be provided by the closed-loop drive or by an external mechanical lock during power-off states. Standard bearings and vibration grade R balancing complement these features by keeping running noise and resonance low.

Cabling exits on the motor’s B-Side, keeping the connection hardware clear of moving load structures when the shaft, supplied as a half-key form without a seal, faces the work area. Electrical characteristics are tied to winding code 0050, establishing current and voltage values that match low-speed, high-torque duty cycles. Mechanical integrity is verified by vibration grade R, which limits displacement so that couplings and mounts remain within tolerance during continuous operation.