MAF160C-0050-FQ-M2-EG0-05-N1, Bosch Rexroth Indramat, MAF IndraDyn Asynchronous Motors delivers robust performance with a 14.1 kW rated power output at 500 1/min rated speed. Equipped with a Multiturn absolute encoder supporting EnDat2.1 and 2048 increments, this motor offers precise position feedback. The standardized bearing and a plain shaft with sealing ring ensure mechanical stability under demanding loads. With no holding brake installed, the design prioritizes simplicity and reduced maintenance.
Engineered for industrial applications, the motor produces a rated torque of 270 Nm and sustains a maximum torque of 594 Nm under a rated current of 37.9 Amperes. A torque constant at 20C of 8.25 Nm/A guarantees linear torque response and accurate control. Thermal management is assured by a thermal time constant of 20 min, while the minimum cross section of power cable specified at 6 mm2 supports efficient power delivery. The enclosure and components operate reliably in ambient temperatures from 0....+40C, with a noise level of 72 (+3) dB(A) measured under nominal load.
Integration into existing drive systems is streamlined by standardized dimensions and electrical interfaces, facilitating swift installation. The absolute encoder with high resolution enhances closed-loop control accuracy, improving dynamic response and process throughput. Designed for continuous duty, the motor’s robust thermal characteristics and sealed shaft interface ensure long-term reliability and minimal downtime in harsh industrial environments.
Maximum speed
594 Nm
Min. cross section of power cable
6 mm2
Noise level
72 (+3) dB(A)
Permissible ambient temperature
0....+40C
Rated current
37.9 Amperes
Rated power
14.1 kW
Rated speed
500 1/min
Rated torque
270 Nm
Thermal time constant
20 min
Torque constant at 20C
8.25 Nm/A