MAF160C-0200-FQ-M2-DG0-05-N1
MAF IndraDyn Asynchronous Motors
The MAF160C-0200-FQ-M2-DG0-05-N1 is an induction motor produced by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. Designed as a drive element for automation cells, it converts electrical input into mechanical rotation that can be coupled directly to gearboxes, spindles, or pump stages. By supplying three pole pairs and a squirrel-cage rotor, the unit delivers controlled torque over a wide speed range, allowing a motion controller to keep velocity and load in sync during continuous operation.
Its continuous operating point is defined by a rated output of 59.7 kW at a shaft speed of 2000 rpm. Under these conditions the motor draws 136 A and produces 285 Nm of torque, giving the drive train an energy density appropriate for medium-size production machinery. The enclosure carries a IP65 protection class, so ingress of dust and water jets is blocked when the cable glands are tightened. A minimum power-lead cross-section of 2 × 16 mm² is required to carry the full current without excess heating, and six stator slots distributed across three pole pairs maintain balanced magnetic fields. The thermal time constant of 20 minutes indicates how quickly winding temperature rises after a load step, which helps size external cooling airflow or coolant flow.
For transient events such as acceleration, the drive can reach a peak shaft load of 658 Nm until thermal limits dictate a return to nominal ratings. Each ampere supplied above no-load induces torque according to a constant of 2.3 Nm/A, simplifying current-loop tuning in the servo inverter. The rotor’s ability to change speed is linked to its 0.311 kg·m² moment of inertia; coupling this with the total assembly weight of 233 kg helps absorb vibration in rigidly mounted frames. Together these values allow the control system to predict speed changes accurately without overshoot.
Technical Specifications
Cont Current Standstill
141.4 A
Cont Torque Standstill
295 Nm
Derating Speed
1500 rpm
Max Torque
658 Nm
Maximum Speed
658 Nm
Min Cross Section Of Power Cable
2x16 mm²
Motor Mass
233 kg
Number Of Pole Pairs
3
Pole Pairs
3
Protection Class
IP65
Rated current
136 A
Rated power
59.7 kW
Rated speed
2000 rpm
Rated torque
285 Nm
Rotor Inertia
0.311 kgm²
Rotor Moment Of Inertia
0.311 kgm²
Thermal time constant
20 min
Torque Constant (20°c)
2.3 Nm/A
Common Misspellings
Fax: 1-919-867-6204
Shipping & Payment Options
Warranty
Indramat USA 1 Year Warranty
Repair
We offer a repair service for the MAF160C-0200-FQ-M2-DG0-05-N1. 
Want to 
