MAF160C-0200-FQ-M2-FH0-05-N1

The MAF160C-0200-FQ-M2-FH0-05-N1 is an asynchronous motor manufactured by Bosch Rexroth Indramat for the MAF IndraDyn Asynchronous Motors series. It operates from an inverter supply to deliver controlled rotation for automated conveyors, presses, and machining axes. With three pole pairs, the rotor establishes a balanced magnetic field that supports smooth motion across the speed range needed in industrial automation.

The motor reaches its rated mechanical point at a speed of 2000 rpm, where it produces a rated torque of 285 Nm while drawing a rated line current of 136 A. At that operating point the electrical input is converted into a rated power output of 59.7 kW, allowing the drive to handle moderately high-inertia loads without additional gearing. Enclosure sealing meets the IP65 protection class so dust ingress and low-pressure water jets do not affect the winding insulation. Above the 1500 rpm derating speed, continuous torque is reduced to maintain thermal equilibrium, and the torque constant of 2.3 Nm/A ensures predictable torque rise as current increases.

For short duty cycles the motor can supply a maximum torque of 658 Nm, enabling rapid acceleration of indexing tables or spindle starts. When stopped and energized it can hold a load with a continuous standstill torque of 295 Nm while the windings sustain a continuous current of 141.4 A. The torque constant at 20 °C remains stable at 2.3 Nm/A, giving the controller a fixed current-to-torque conversion factor during temperature-compensated control. Together with the 1500 rpm derating threshold and the three pole-pair design, these peak and standstill characteristics define the dynamic limits available to machine builders who need high intermittent torque without sacrificing steady-state efficiency.