The MAF225C-0150-FQ-M2-TF0-35-N1 asynchronous housing motor from Bosch Rexroth Indramat is part of the MAF IndraDyn Asynchronous Motors series. This induction motor features a Multiturn absolute encoder with EnDat2.1 protocol and 2048 increments, along with a Standard bearing at Side B for reliable support. Designed for industrial automation, its primary function is to provide precise and continuous torque in demanding applications, requiring connection to a compatible drive controller to manage speed and load.
In terms of technical specifications, this motor employs a labyrinth seal rated at 200 RPM on a smooth shaft to prevent contamination and extend service life. It withstands high radial forces in the vertical direction and axial shock loads up to 10 m/s^2. Electrical connection is made via a robust terminal box with threaded holes along the housing for secure coolant port and cable connections. The unit is protected by a single temperature sensor with a pre-warning threshold of 120 degrees C and automatic shutdown at 130 degrees C to prevent thermal overload. Threaded connector depth is limited to 18 mm to maintain housing integrity.
Additional durability features include dynamic balancing per EN 60034-14 and bearing life rated at 30,000 operating hours in accordance with ISO 281. The motor is rated for relative humidity from 5% to 95%, suitable for environments with strong atomized spray. It must be used with manufacturer-specified coolants and cables, and is compatible only with GTM series planetary gearboxes. Transport and storage in horizontal orientation preserve seal integrity. Without a holding brake, it offers flexibility in system integration. Overall, the MAF225C-0150-FQ-M2-TF0-35-N1 delivers reliable performance, precise motion control, and long-term efficiency in industrial automation systems.
Bearing Location
Side B
Direction of Radial Force
Vertical
Electrical Connection Method
Terminal Box
High Relative Air Humidity During Operation
95%
Labyrinth Seal
200 RPM
Low Relative Air Humidity During Operation
5%
Maximum Allowed Axial Shock Load
10 m/s^2
Maximum Allowed Screw-In Depth of Connector Thread
18 mm
Pre-Warning Temperature
120 degrees C
Threaded Holes
Yes