MDD025A-N-100-N2G-040MA1
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
1.0 Nm
Centering Diameter
40 mm
Housing
Standard
Motor Feedback
Resolver feedback
Continuous Torque at Standstill
0.33 Nm
Motor Length Code
A
Motor Size
025
Nominal Speed
10000 min⁻¹
Shaft Seal
Without shaft seal
Shaft Type
keyway
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does the blocking brake performance (1.0 Nm holding torque) affect application safety and positioning when power is lost?
A 1.0 Nm brake holding torque allows the axis to remain in place under modest external loads during power interruptions, reducing drift; however, for heavier loads or high inertia, external mechanical support or higher torque brakes may still be needed.
Why is standard balancing relevant for running the motor at its nominal speed of 10,000 min⁻¹?
Standard balancing ensures that rotor imbalance (vibration) is kept within tolerances so that at high RPM the motor runs smoothly, avoiding excess bearing wear and noise; without good balance, resonance and mechanical stress increase significantly with speed.
What are the implications of choosing resolver feedback with respect to control accuracy and maintenance?
Resolver feedback offers robust operation in harsh environments (temperature, EMI) and good relative precision (≈ ±7 angular minutes), but absolute position is lost when power cycles unless an absolute encoder or homing scheme is used.
What are the thermal and environmental limits of operation for MDD series motors of this size?
Typical ambient temperature rating is 0 to +45 °C, installation elevation up to ~1000 m; exceeding these causes derating of continuous torque and possibly reduced permissible overload periods
What electrical and drive controller requirements does the motor set (side-A connector, resolver, keyway shaft) impose?
The drive must support a resolver feedback interface, have matching connector on Side A (direction of connection), and tolerate cable lengths / routing to avoid signal noise; the power electronics must handle peak currents & torque demands around the curves for this motor size.
Common Misspellings
MDD-025A-N-100-N2G-040MA1
MDD025A N 100 N2G 040MA1
MDD025A-N-100-N2G-040-MA1
MDD025AN100N2G040MA1
MDD25A-N-100-N2G-040MA1
MDDO25A-N-100-N2G-040MA1
MDDO25A-N-1OO-N2G-O4OMA1
Internal Product Review
The MDD025A-N-100-N2G-040MA1 motor by Bosch Rexroth delivers 0.33 Nm continuous torque and 10,000 min⁻¹ nominal speed with resolver feedback and keyway shaft. It includes a 1.0 Nm blocking brake and standard housing. This motor is well-suited for applications in robotics, electronics manufacturing, and packaging automation.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD025A-N-100-N2G-040MA1.
Want to 
