MDD041B-N-100-N2G-050FA1
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
1.2 Nm
Centering Diameter
50 mm
Housing
Standard
Motor Feedback
Resolver feedback
Continuous Torque at Standstill
1.35 Nm
Motor Length Code
B
Motor Size
041
Nominal Speed
10000 min⁻¹
Shaft Seal
Without shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What does the plain shaft design of the MDD041B-N-100-N2G-050FA1 mean for coupling?
A plain shaft allows direct use of standard couplings without additional keying. This simplifies installation but requires precise alignment to avoid premature wear.
Does the holding brake in the MDD041B-N-100-N2G-050FA1 support safety during power loss?
Yes, the integrated brake locks the shaft when power is off. It prevents load drift, making it suitable for vertical or safety-critical applications.
How does nominal speed influence motor selection for fast-moving systems?
A 10,000 min⁻¹ rating supports rapid positioning and cycle times. This makes it suitable for pick-and-place systems and packaging lines.
What installation care is needed with a 50 mm centering diameter?
The centering diameter ensures alignment between motor and driven part. Accurate seating reduces vibration and prolongs bearing life.
Why does connection direction matter in tight machine layouts?
Side A connectors define where cables exit the housing. Poor planning can cause cable strain or limit accessibility during maintenance.
Common Misspellings
MDD-041B-N-100-N2G-050FA1
MDD041B N 100 N2G 050FA1
MDD041B-N-100-N2G-050-FA1
MDD041BN100N2G050FA1
MDD41B-N-100-N2G-050FA1
MDDO41B-N-100-N2G-050FA1
MDDO41B-N-1OO-N2G-O5OFA1
Internal Product Review
The Bosch Rexroth Indramat MDD041B-N-100-N2G-050FA1 is a synchronous motor in the MDD series. It equips resolver feedback with an absolute encoder, and spins at a nominal 10,000 min⁻¹ via a plain shaft with a 50 mm centering diameter. Its housing is typically machined aluminium designed for good dissipation of heat and protection against industrial conditions.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD041B-N-100-N2G-050FA1.
Want to 
