MDD065A-N-040-N2M-095GL1
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
3.0 Nm
Centering Diameter
95 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
0.8 Nm
Motor Length Code
A
Motor Size
065
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What considerations are needed when pairing this motor with a drive controller?
The drive must support digital servo feedback protocols for compatibility. Mismatched feedback systems can lead to errors or failure to initialize.
How does nominal speed influence servo motor selection?
Nominal speed defines continuous operation speed without overload. Choosing correctly ensures the motor meets cycle times without excessive heating.
Why does connection orientation (left-side connector) matter in system design?
Connector orientation can simplify cabling in tight enclosures. Left-side placement reduces cable bending and stress where layouts demand lateral exits.
Can the MDD065A-N-040-N2M-095GL1 operate continuously at stall torque without damage?
Yes, it can sustain 0.8 Nm at standstill within thermal limits. Adequate cooling must be ensured to prevent overheating during prolonged stall conditions.
What is the practical impact of having 3.0 Nm holding brake torque?
It secures the axis when power is removed, preventing drift on vertical loads. This is crucial for safety and maintaining position in machine stops.
Common Misspellings
MDD-065A-N-040-N2M-095GL1
MDD065A N 040 N2M 095GL1
MDD065A-N-040-N2M-095-GL1
MDD065AN040N2M095GL1
MDD65A-N-040-N2M-095GL1
MDDO65A-N-040-N2M-095GL1
MDDO65A-N-O4O-N2M-O95GL1
Internal Product Review
The Bosch Rexroth Indramat MDD065A-N-040-N2M-095GL1 is a synchronous motor designed for digital drive controllers. It features an integrated multiturn absolute encoder, delivers 0.8 Nm standstill torque and 3.0 Nm holding-brake torque. It is used for precise positioning, maintaining torque under load, and repeatable motion in automated industrial settings.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD065A-N-040-N2M-095GL1.
Want to 
