MDD065A-N-060-N2M-095PA1
MDD Synchronous Motors
The MDD065A-N-060-N2M-095PA1 from Bosch Rexroth Indramat features a motor size of 065 and continuous torque of 0.8 Nm. Part of the MDD Synchronous Motors series, it reaches a nominal speed of 6000 min-1 and includes a holding brake with 3.0 Nm torque. It uses an integrated multiturn absolute encoder and provides digital servo feedback.
Featuring standard balancing and a shaft seal, it connects via a side A connector. It has a centering diameter of 95 mm. Designed for digital drive controllers.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
3.0 Nm
Centering Diameter
95 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
0.8 Nm
Motor Length Code
A
Motor Size
065
Nominal Speed
6000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What installation factors should be considered with a 95 mm centering diameter?
A 95 mm centering diameter requires compatible flange or housing bores for accurate shaft alignment. Poor centering increases wear on bearings and couplings.
Why is an integrated multiturn absolute encoder advantageous?
It retains position data after shutdown without needing homing cycles. This reduces downtime in automated lines with frequent power cycling.
How does the side A connection direction affect cabinet layout?
Cable routing must allow clearance on one side, influencing panel or machine design. Poor planning can cause tight bends that degrade connector life.
How does the shaft seal contribute to long-term reliability?
The seal protects against dust and oil ingress, extending bearing and encoder lifespan. However, it adds friction, slightly reducing mechanical efficiency.
What housing characteristics are typical for the MDD065A-N-060-N2M-095PA1?
It uses a coated, convection-cooled housing that resists common shop contaminants. Adequate airflow must be ensured to avoid localized heating.
Common Misspellings
MDD-065A-N-060-N2M-095PA1
MDD065A N 060 N2M 095PA1
MDD065A-N-060-N2M-095-PA1
MDD065AN060N2M095PA1
MDD65A-N-060-N2M-095PA1
MDDO65A-N-060-N2M-095PA1
MDDO65A-N-O6O-N2M-O95PA1
Internal Product Review
The Bosch Rexroth Indramat MDD065A-N-060-N2M-095PA1 is a synchronous motor designed for integration with digital drive controllers. It features an integrated multiturn absolute encoder with digital servo feedback, a centering diameter of 95 mm, shaft seal, and side-A connector. Its housing is the “standard” type used in the MDD series.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD065A-N-060-N2M-095PA1.
Want to 
