MDD071A-N-030-N2S-095GB2
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD071A-N-030-N2S-095GB2 is a reliable motor for digital drive controllers from the MDD Synchronous Motors series, offering 2.2 Nm continuous torque and 6.5 Nm holding brake torque. It features digital DSF feedback, a 95 mm centering diameter, plain shaft with seal, blocking brake, side B connector, standard balancing, length code A, motor size 071, and nominal speed 3000 min⁻¹.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Centering Diameter
95 mm
Housing
Standard
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
2.2 Nm
Motor Length Code
A
Motor Size
071
Nominal Speed
3000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side B
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
Why is DSF feedback valuable when the motor runs at its rated 3000 min⁻¹?
It delivers precise rotor position data in real time, keeping motion synchronized and stable even under high-speed conditions.
How does the MDD071A-N-030-N2S-095GB2’s Side B connector orientation simplify integration?
By routing cables away from the active drive side, it eases wiring in compact machine layouts and minimizes interference.
In what way does the 6.5 Nm blocking brake enhance reliability in heavy-duty tasks?
It locks larger loads firmly during shutdowns or power loss, preventing slippage and ensuring safe positioning.
What service options exist if the MDD071A-N-030-N2S-095GB2’s brake develops a fault?
Minor adjustments are often possible on-site, though significant brake failures typically require replacement or factory-level repair.
What risks are introduced when balancing tolerances are not maintained?
Excess vibration may occur, leading to faster bearing wear, noisy operation, and reduced longevity of connected components.
Common Misspellings
MDD-071A-N-030-N2S-095GB2
MDD071A N 030 N2S 095GB2
MDD071A-N-030-N2S-095-GB2
MDD071AN030N2S095GB2
MDD71A-N-030-N2S-095GB2
MDDO71A-N-030-N2S-095GB2
MDDO71A-N-O3O-N2S-O95GB2
Internal Product Review
The MDD071A-N-030-N2S-095GB2 motor by Bosch Rexroth Indramat is a reliable motor for digital drive controllers from the MDD Synchronous Motors series, offering 2.2 Nm continuous torque and 6.5 Nm holding brake torque. It features digital DSF feedback, a 95 mm centering diameter, plain shaft with seal, blocking brake, side B connector, standard balancing, length code A, motor size 071, and nominal speed 3000 min⁻¹. This ensures strong performance in automation and industrial control systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD071A-N-030-N2S-095GB2.
Want to 
