MDD071A-N-040-N2T-095GL2
MDD Synchronous Motors
The MDD071A-N-040-N2T-095GL2 from Bosch Rexroth Indramat features a motor size of 071 and a motor length code of A. Part of the MDD Synchronous Motors series, it runs at 4000 min⁻¹ and uses a blocking brake. It offers an integrated absolute encoder and digital servo feedback.
This motor provides a continuous torque at standstill of 2.2 Nm and a holding brake torque of 6.5 Nm. With a centering diameter of 95 mm, it ensures precise mounting. It includes a shaft seal for durability.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Centering Diameter
95 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
2.2 Nm
Motor Length Code
A
Motor Size
071
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does the MDD071A-N-040-N2T-095GL2 handle load fluctuations in heavy conveyor systems?
Its 6.5 Nm brake capacity provides reliable load retention during sudden stops, preventing drift even under variable loads.
Which practices help sustain thermal stability during extended operation?
Maintaining clean airflow paths, checking shaft seals for leaks, and monitoring vibration levels ensure consistent cooling.
What are the early signs of overheating or brake wear?
Delayed brake engagement, higher-than-normal surface temperatures, and erratic encoder signals can indicate developing issues.
Can the MDD071A-N-040-N2T-095GL2 be repaired after severe overload?
Minor faults like seal or connector damage can be addressed locally, but winding or brake assembly failures require factory repair.
In what way does encoder integration support durability under high-duty cycles?
The multiturn encoder ensures precise tracking across repeated stops and starts, preventing misalignment over long-term use.
Common Misspellings
MDD-071A-N-040-N2T-095GL2
MDD071A N 040 N2T 095GL2
MDD071A-N-040-N2T-095-GL2
MDD071AN040N2T095GL2
MDD71A-N-040-N2T-095GL2
MDDO71A-N-040-N2T-095GL2
MDDO71A-N-O4O-N2T-O95GL2
Internal Product Review
Built with a left-side connector and standard balancing, the Bosch Rexroth Indramat MDD071A-N-040-N2T-095GL2 motor integrates easily into digital drive controllers. Its 6.5 Nm holding brake torque combined with a shaft seal and 95 mm centering diameter ensures secure stops and long-term durability. It supports robotics, automated packaging, and heavy conveyor applications.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD071A-N-040-N2T-095GL2.
Want to 
