MDD071B-N-040-N2T-095GA2
MDD Synchronous Motors
The MDD071B-N-040-N2T-095GA2 is a motor for digital drive controllers manufactured by Bosch Rexroth Indramat. Part of the MDD Synchronous Motors series, it delivers a continuous torque at standstill of 4.4 Nm and a holding brake torque of 6.5 Nm. Featuring an integrated multiturn absolute encoder and digital servo feedback (DSF), it runs at 4000 min⁻¹. The motor has a 95 mm centering diameter, a plain shaft with shaft seal, and connects via a side A connector.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Centering Diameter
95 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
4.4 Nm
Motor Length Code
B
Motor Size
071
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does holding brake torque affect safety for MDD071B-N-040-N2T-095GA2?
The holding brake torque is 6.5 Nm and it defines the brake’s resistance to load. This higher torque secures heavier loads during stops.
Why is continuous torque at standstill important for MDD071B-N-040-N2T-095GA2?
With a static torque rating of 4.4 Nm, the motor shows its holding capacity under load. This torque ensures stable positioning when it is not rotating
How does motor feedback type influence control precision for MDD071B-N-040-N2T-095GA2?
The motor feedback is Digital servo feedback (DSF) and it supplies high resolution position signals. This feedback improves control accuracy and dynamic response.
What does the motor length code tell integrators about MDD071B-N-040-N2T-095GA2?
The motor length code is B and it indicates a specific stack length within the series. This code guides envelope planning and weight estimates.
Why does the product type matter when choosing drives for MDD071B-N-040-N2T-095GA2?
The product type is Motor for digital drive controllers and it matches digital servo drives. This classification ensures compatibility with modern motion controllers.
Common Misspellings
MDD-071B-N-040-N2T-095GA2
MDD071B N 040 N2T 095GA2
MDD071B-N-040-N2T-095-GA2
MDD071BN040N2T095GA2
MDD71B-N-040-N2T-095GA2
MDDO71B-N-040-N2T-095GA2
MDDO71B-N-O4O-N2T-O95GA2
mdd071b-n-040-n2t-095ga2
Internal Product Review
MDD071B-N-040-N2T-095GA2 is a top rated motor that simply suits demanding motion tasks. robust servo built for heavy duty cycles and tight control. The motor features an onboard multiturn absolute encoder that keeps position data after power loss, supporting reliable restarts and reduced downtime.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD071B-N-040-N2T-095GA2.
Want to 
