MDD071C-N-040-N2T-095PL1
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD071C-N-040-N2T-095PL1 motor from the MDD Synchronous Motors series is a high-performance motor for digital drive controllers featuring a motor size of 071 and motor length code C. It delivers a continuous torque at standstill of 6.6 Nm and incorporates a holding brake with a torque of 3.0 Nm, ensuring secure holding under load. The motor has a centering diameter of 95 mm and a standard housing, with a shaft type keyway and standard shaft end. Rated for a nominal speed of 4000 min⁻¹, it includes an integrated multiturn absolute encoder and supports Digital servo feedback (DSF). Equipped with a shaft seal, a left connection direction, and a connector connection type, this standard-balanced motor delivers reliable performance in demanding automation environments.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
3.0 Nm
Centering Diameter
95 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
6.6 Nm
Motor Length Code
C
Motor Size
071
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does the DSF system in the MDD071C-N-040-N2T-095PL1 impact high-speed feedback loops in real-time applications?
Its Digital Servo Feedback provides fast, high-resolution communication with the drive. This supports precise control in dynamic motion tasks with minimal delay or signal distortion.
How does the MDD071C-N-040-N2T-095PL1 maintain precise position control without needing recalibration after power interruptions?
The motor integrates a multiturn absolute encoder that preserves shaft position across shutdowns. This ensures reliable startup sequencing and eliminates the need for manual homing cycles.
Can the MDD071C-N-040-N2T-095PL1 hold static loads safely during prolonged idle states or emergency stops?
It includes a 3.0 Nm holding brake that mechanically locks the shaft under load. This adds protection in vertical-axis or suspended-load applications during unpowered conditions.
Will the MDD071C-N-040-N2T-095PL1 operate reliably in environments with high particulate or fluid exposure near the coupling interface?
The shaft features a protective seal that resists ingress from dust, oil, or moisture. It increases operational lifespan and safeguards internal components in sealed or semi-open machine setups.
How does the MDD071C-N-040-N2T-095PL1 help maintain alignment in assemblies with tight geometric tolerances?
It uses a 95 mm centering diameter to ensure consistent axial positioning during motor mounting. This prevents offset and reduces premature wear on bearings and couplings.
Common Misspellings
MDD-071C-N-040-N2T-095PL1
MDD071C N 040 N2T 095PL1
MDD071C-N-040-N2T-095-PL1
MDD071CN040N2T095PL1
MDD71C-N-040-N2T-095PL1
MDDO71C-N-040-N2T-095PL1
MDDO71C-N-O4O-N2T-O95PL1
Internal Product Review
The Bosch Rexroth Indramat MDD071C-N-040-N2T-095PL1 is a synchronous motor with a 95 mm centering diameter and motor size 071. It runs at 4000 min⁻¹, features a multiturn absolute encoder, digital servo feedback, and a keyway shaft with seal. A 3.0 Nm holding brake ensures secure load retention.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD071C-N-040-N2T-095PL1.
Want to 
