MDD071C-N-040-N2T-095PL2
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD071C-N-040-N2T-095PL2 is a robust motor for digital drive controllers from the MDD Synchronous Motors series, offering 6.6 Nm continuous torque at standstill and an integrated 6.5 Nm holding brake, plus an integrated multiturn absolute encoder in a standard housing with keyway shaft.
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Centering Diameter
95 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
6.6 Nm
Motor Length Code
C
Motor Size
071
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Left
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does the MDD071C-N-040-N2T-095PL2 ensure accurate position tracking across multiple machine cycles without re-homing?
It integrates a multiturn absolute encoder that retains exact shaft position through power cycles. This enables instant recovery and precise motion continuity in complex automation sequences.
What keeps the MDD071C-N-040-N2T-095PL2 motor stable during load-hold operations in locked or static axis applications?
The motor delivers continuous torque at standstill without degradation. This ensures consistent force output and protects against thermal drift during extended non-rotational load cycles.
How does the holding system in MDD071C-N-040-N2T-095PL2 prevent motion drift during unexpected stops?
It uses an integrated 6.5 Nm holding brake that clamps the shaft under load. This adds mechanical safety in vertical or suspended configurations during drive power loss.
What impact does the keyway shaft have on rotational consistency under changing directional torque loads?
The keyway shaft supports reliable mechanical locking between motor and coupling. It minimizes backlash and maintains torque alignment during rapid motion reversals.
How does the housing design affect installation efficiency in dense automation frames?
The standard housing simplifies mounting and aligns easily with digital drive controllers. It provides dimensional compatibility across multiple system layouts without additional fixtures.
Common Misspellings
MDD-071C-N-040-N2T-095PL2
MDD071C N 040 N2T 095PL2
MDD071C-N-040-N2T-095-PL2
MDD071CN040N2T095PL2
MDD71C-N-040-N2T-095PL2
MDDO71C-N-040-N2T-095PL2
MDDO71C-N-O4O-N2T-O95PL2
Internal Product Review
The MDD071C-N-040-N2T-095PL2 by Bosch Rexroth Indramat is a synchronous motor delivering 6.6 Nm continuous torque at standstill. It includes a 6.5 Nm holding brake, multiturn absolute encoder, and a keyway shaft in standard housing. This motor is engineered for use with digital drive controllers in automated systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD071C-N-040-N2T-095PL2.
Want to 
