MDD071C-N-040-N2T-095PR2
MDD Synchronous Motors
Technical Specifications
Balancing
Standard
Holding Brake
With blocking brake
Holding Brake Torque
6.5 Nm
Centering Diameter
95 mm
Housing
Standard
Encoder
Integrated multiturn absolute encoder
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
6.6 Nm
Motor Length Code
C
Motor Size
071
Nominal Speed
4000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
keyway
Connection Direction
Right
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
How does the centering interface influence mechanical alignment during installation in tight-tolerance systems?
A 95 mm centering diameter ensures accurate motor seating within mounting assemblies. This minimizes axial misalignment and reduces mechanical stress during prolonged load cycles.
How does the MDD071C-N-040-N2T-095PR2 prevent position loss in high-cycle motion systems after power interruption?
It features an integrated multiturn absolute encoder that tracks multi-revolution shaft position without external reference. This enables consistent position recall during reboots or emergency recovery.
What ensures shaft locking under vertical load when the drive holding circuit is disabled?
The motor includes a holding brake designed for static load retention during drive-off states. It prevents shaft rotation and maintains axis position in gravity-influenced systems.
How does the MDD071C-N-040-N2T-095PR2 improve signal reliability in fast, real-time control environments?
It uses digital servo feedback (DSF) for precise, high-resolution data transmission between motor and controller. This supports responsive loop tuning in high-speed motion control systems.
Will the shaft seal construction support durability in dusty or semi-sealed cabinet installations?
The integrated shaft seal blocks contaminants from entering the motor housing. It increases long-term reliability and protects internal components during operation in particulate-heavy environments.
Common Misspellings
MDD-071C-N-040-N2T-095PR2
MDD071C N 040 N2T 095PR2
MDD071C-N-040-N2T-095-PR2
MDD071CN040N2T095PR2
MDD71C-N-040-N2T-095PR2
MDDO71C-N-040-N2T-095PR2
MDDO71C-N-O4O-N2T-O95PR2
Internal Product Review
The Rexroth Indramat MDD071C-N-040-N2T-095PR2 is a synchronous motor delivering 6.6 Nm continuous torque at standstill. It features a 6.5 Nm holding brake torque, multiturn absolute encoder with DSF, and right-side connector for mounting ease. This motor is ideal for precision digital drive controller applications.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD071C-N-040-N2T-095PR2.
Want to 
