MDD071C-N-060-N2S-095GA0
MDD Synchronous Motors
The Bosch Rexroth Indramat MDD071C-N-060-N2S-095GA0 is a reliable motor for digital drive controllers from the MDD Synchronous Motors series. It provides 6.6 Nm continuous torque at standstill and a top speed of 6000 min⁻¹. Featuring DSF, 95 mm centering, shaft with shaft seal, side A connector, no blocking brake.
Technical Specifications
Balancing
Standard
Holding Brake
Without blocking brake
Centering Diameter
95 mm
Housing
Standard
Motor feedback
Digital servo feedback (DSF)
Continuous Torque at Standstill
6.6 Nm
Motor Length Code
C
Motor Size
071
Nominal Speed
6000 min⁻¹
Shaft Seal
With shaft seal
Shaft Type
Plain shaft
Connection Direction
Side A
Connection Type
Connector
Product Type
Motor for digital drive controllers
Shaft End
Standard (without side B shaft end)
Frequently Asked Questions
What integration benefits does the side A connector layout provide during panel-mounted installation?
The motor comes with a side A connector, which aligns with forward-facing cabinet routing. This simplifies cable organization and reduces connector strain in narrow spaces.
How does the MDD071C-N-060-N2S-095GA0 perform under closed-loop control in high-speed multi-axis systems?
It uses Digital Servo Feedback (DSF) to send precise motion data to the drive. This enables fast correction and reliable control even with varying speed and torque demands.
How does the MDD071C-N-060-N2S-095GA0 maintain structural alignment in dense automation frames?
The motor features a 95 mm centering diameter to provide accurate axial mounting. It supports consistent shaft alignment and reduces stress on couplings in tight-fit assemblies.
Will the MDD071C-N-060-N2S-095GA0 operate reliably in environments prone to oil or dust intrusion?
It includes a shaft seal that protects internal bearings from external contaminants. This increases system uptime and lowers maintenance frequency in harsh conditions.
How does the motor sustain output torque in prolonged stall or static-load conditions?
It delivers 6.6 Nm continuous torque at standstill, allowing it to hold position without overheating. This ensures dependable force delivery in low-speed or dwell-phase operations.
Common Misspellings
MDD-071C-N-060-N2S-095GA0
MDD071C N 060 N2S 095GA0
MDD071C-N-060-N2S-095-GA0
MDD071C-N-060-N2S-095-GAO
MDD071C-N-060-N2S-095GAO
MDD071CN060N2S095GA0
MDD71C-N-060-N2S-095GA0
MDDO71C-N-060-N2S-095GA0
MDDO71C-N-O6O-N2S-O95GAO
mdd071c-n-060-n2s-095ga0
Internal Product Review
The MDD071C-N-060-N2S-095GA0 is a synchronous motor by Bosch Rexroth Indramat. It delivers 6.6 Nm continuous torque at standstill. It features a sealed shaft, 95 mm centering, and a side A connector. It is ideal for precision motion in digital drive-controlled industrial automation systems.
Shipping & Payment Options
Warranty
Repair
We offer a repair service for the MDD071C-N-060-N2S-095GA0.
Want to 
